CarpForum.co.uk brand mark, a blue stylized fish with a white eye and a smooth modern look, set in the site header against a clean background CarpForum.co.uk wordmark in a bold flowing script style, reading CarpForum.co.uk, displayed in the site header
Menu
Utils
Go Premium Who's Online Members Weather Photo Gallery Articles
Account
Login Register
Considerations when buying a barrow (24 posts / 3,164 views)
mistercarp
Posts: 1,305
Post #1 6 Nov 2022 16:15
0
Hi guys,

I am looking at buying a (non motorised) barrow, but I never used one. Could you guys please advise me what I should consider or think about when buying one? Doni really wouldn't know what I will/can expect to encounter.

Thanks in advance!
OatcakeFred OatcakeFred
Posts: 1,466
Post #2 6 Nov 2022 16:21
0
In reply to Post #1
Get a 3 wheeled one, I had a single wheel one and it knackered me because you have to take the weight of it with the handles. So I got Global Angling to knock me up a set of rear wheels, best £100 I've spent.
Beyonce
Posts: 1,711
Post #3 6 Nov 2022 16:42
0
In reply to Post #2
I agree that applies with lakes with proper tracks around them, but three wheels are worse going through heavy mud and rough ground. A single narrow wheel is the one in those conditions.

To the OP. I have a Fox Explorer, decent barrow but If I was going to buy again I would get the Porterlite. Nice and simple and small pack up.
christian
Posts: 1,377
Post #4 6 Nov 2022 16:58
0
I have a trakker gravity barrow, no longer made I'm afraid but the concept of putting as much weight as possible in front of and above the front wheel is still a possibility with their current offering the x trail. You need the handles low so when standing the weight is on the front wheel and not your arms, load it right and you can end up having to push the handles down rather than holding weight on them. My gravity barrow is exceptionally well made with quality materials, has already lasted at least 8 years and has loads of life in it yet....get a powered wheel for it and it's even better.
Ged
Posts: 477
Post #5 6 Nov 2022 17:15
0
In reply to Post #1
If going for a single wheel barrow make sure the wheel is set far enough back to get some weight ahead of it. I can load my original Carp Porter so that there is very little weight on the handles. Unfortunately this makes it less stable, so you have to be careful where you park it for a chat or a rest. With a three wheeled barrow you can get away with the load set further back as you don't have to lift it, except to change direction. Personally I don't find any need for for side bars, I found they were more hinderence than useful, I've removed them on both my barrows. As you will be pushing it go for a narrow wheel, wide tractor style wheels are more suited to a power barrow.
mark1009
Posts: 4,738
Post #6 6 Nov 2022 17:21
0
In reply to Post #5
Do you have to go through any narrow gate or over bridges. I have a triporter which is great for some lakes I fish. However, one lake I fish has a narrow bridge, and the triporter cannot negotiate through. Need amother small barrow for that venue.
mrjcarter mrjcarter
Posts: 1,370
Post #7 6 Nov 2022 17:22
0
In reply to Post #1
Look for one with underframe storage, keeps your smaller bags, bottles tucked away and helps save space.
Fox and avid cover this well
christian
Posts: 1,377
Post #8 6 Nov 2022 17:32
0
In reply to Post #6
Yes I do, on one lake I have to cross up to 3 bridges, it was never a problem until I bought a fox frontier which I find is easiest to transport across the barrow but 2 of the bridges have gates that make that impossible, so I have to unload in now and carry it across.
mistercarp
Posts: 1,305
Post #9 6 Nov 2022 20:23
0
Thanks all for your replies. Very helpful!

I don't have to cross narrow bridges, so that is something I don't really have to worry about. I was more thinking about things like 1 or 3 wheels, side bars or not, what type of wheel indeed.

I will check some out. Thanks again!
JasonM JasonM
Posts: 1,764
Post #10 6 Nov 2022 20:33
0
In reply to Post #9
Your sidebars are your bedchair legs 👍
Ged
Posts: 477
Post #11 6 Nov 2022 20:49
0
In reply to Post #9
I would say go for a narrow wheel, but the largest diameter. Three wheel barrows are great for smoothish flat tracks. I've got a 3 wheel power porter, when loaded it's very heavy to lift the handles, which you need to do when changing direction or traversing side slopes. In short, if you're wanting to take heavy loads on a reasonably flat track a 3 wheeler is probably best. If the terrain is a bit rougher with side slopes, I think a single wheel would be better.
wandle1 wandle1
Posts: 7,469
Post #12 6 Nov 2022 21:09
0
Making sure you don't over or under inflate your barrow wheels pressure..mine is 25psi max,porterlite 2



Barrow cover,maybe get a 7ft by 8ft dpm army tarp great addition many other uses
nickfisherman
Posts: 342
Post #13 6 Nov 2022 21:16
0
In reply to Post #3
What would make you choose the porterlite over the explorer?
mistercarp
Posts: 1,305
Post #14 7 Nov 2022 06:43
0
The Fox Deluxe compact barrow and the Trakker X trail I like the look of. Only difference is that the x-trail can be extended from within the frame, while the Fox you can slide the m-shaped upright for laying on the rods towards you or away fro you.

What would you prefer?
zinno
Posts: 1,381
Post #15 7 Nov 2022 06:54
0
I have an Carp Porter MK2 (last versions) worst buy ever, metal material is cheap chinese junk, then bought a Nash trax old model much better quality but the are big.

Total tackle fishing have an adapted Fox barrow: Deluxe TT camo
Are you sure?

This action cannot be undone.

Yes, continue

Loading…