The humble rake….
I am paranoid about presentation…..how often have you lifted a rig off your spot in the edge, and the meticulously sharpened hook has impaled anything from a small twig to a two-foot-long black and slimy branch.

if I can get chesties on and potter out there with the garden rake to clear things off a bit I feel so much more confident….I like to do it when there is no-one around to see, but having all my fave edge spots spic and span to lower a rig on is a huge confidence boost. If it is a bit too deep for the waders then the “Jake’s Rake” on the rope will get most debris out too.
I always do my raking when there is no-one around and will often have a proper go in the winter and then I just need a super-quick drag over later in the year to get anything that has dropped in, in the interim.
And for float fishing on my local weedy Tench pond, dragging the Jake’s rake through five or six times will have them fizzing and bubbling in a surprisingly short time.
I'd be lost without them😎
I am paranoid about presentation…..how often have you lifted a rig off your spot in the edge, and the meticulously sharpened hook has impaled anything from a small twig to a two-foot-long black and slimy branch.


if I can get chesties on and potter out there with the garden rake to clear things off a bit I feel so much more confident….I like to do it when there is no-one around to see, but having all my fave edge spots spic and span to lower a rig on is a huge confidence boost. If it is a bit too deep for the waders then the “Jake’s Rake” on the rope will get most debris out too.
I always do my raking when there is no-one around and will often have a proper go in the winter and then I just need a super-quick drag over later in the year to get anything that has dropped in, in the interim.
And for float fishing on my local weedy Tench pond, dragging the Jake’s rake through five or six times will have them fizzing and bubbling in a surprisingly short time.
I'd be lost without them😎
In reply to Post #1
I have a Jake rake i used it in the dark last night raked out a spot for this morning ..
Mines the 12 inch version,had a nice fish ,wife came down with sandwich what's not to like !
The perk of living oppo a small fishery, not the biggest or whatever but hey,a carp is a carp !!

See those reeds on the left ,like others I don't cast, especially where they are under yr rods 😎
I have a Jake rake i used it in the dark last night raked out a spot for this morning ..
Mines the 12 inch version,had a nice fish ,wife came down with sandwich what's not to like !
The perk of living oppo a small fishery, not the biggest or whatever but hey,a carp is a carp !!


See those reeds on the left ,like others I don't cast, especially where they are under yr rods 😎
In reply to Post #1
For cleaning off margin spots I have a telescopic rake handle by Wolf Garten.
You can fit a variety of different tools to it, I have three different types of rake heads, a pruning saw and loper attachment.
Way quieter than throwing a rake in on a rope, which I also have (homemade back to back rake heads).
If the area you're raking is silty, in my experience you are better of to use the lightest possible rake, to only clean or turn over the very top layer of silt, if you go to deep and into anaerobic silt it can kill the spot for a good while (weeks).
For cleaning off margin spots I have a telescopic rake handle by Wolf Garten.
You can fit a variety of different tools to it, I have three different types of rake heads, a pruning saw and loper attachment.
Way quieter than throwing a rake in on a rope, which I also have (homemade back to back rake heads).
If the area you're raking is silty, in my experience you are better of to use the lightest possible rake, to only clean or turn over the very top layer of silt, if you go to deep and into anaerobic silt it can kill the spot for a good while (weeks).
In reply to Post #2
Quote: had a nice fish ,wife came down with sandwich
How remarkably civilised😀
Lovely mahogany coloured common, too.
That reed line is SCREAMING out for a bait lowered in next to it!
Quote: had a nice fish ,wife came down with sandwich
How remarkably civilised😀
Lovely mahogany coloured common, too.
That reed line is SCREAMING out for a bait lowered in next to it!
In reply to Post #3
Quote: a telescopic rake handle by Wolf Garten.
You can fit a variety of different tools to it, I have three different types of rake heads, a pruning saw and loper attachment.
just had a google....proper handy bit of kit...I'll stick it on my list to Santa this year😉
Quote: if you go to deep and into anaerobic silt it can kill the spot for a good while
yes, it is only twiggy debris you are aiming to tidy up...excavating the lake bed is counterproductive and damn hard work I'd imagine🙁
Quote: a telescopic rake handle by Wolf Garten.
You can fit a variety of different tools to it, I have three different types of rake heads, a pruning saw and loper attachment.
just had a google....proper handy bit of kit...I'll stick it on my list to Santa this year😉
Quote: if you go to deep and into anaerobic silt it can kill the spot for a good while
yes, it is only twiggy debris you are aiming to tidy up...excavating the lake bed is counterproductive and damn hard work I'd imagine🙁
20 years old, had to change the paracord recently (which is far too long).
Rakes are a huge edge for clearing spots and improving the line lay going into a zone.
I am always surprised with how quickly carp (not just tench) can zone in on an area where naturals have been disrupted with a rake. The tenner a Gardner castable rake costs is well worth the money.
I am always surprised with how quickly carp (not just tench) can zone in on an area where naturals have been disrupted with a rake. The tenner a Gardner castable rake costs is well worth the money.
In reply to Post #7
Quote: I am always surprised with how quickly carp (not just tench) can zone in on an area where naturals have been disrupted with a rake.
Yeah, I am never that bothered about disturbing the fish...more so, other anglers who'd not take too kindly to me hurling a Jakes Rake around like a lunatic!!
I sometimes fish a farm pond and if no one is there I will rake the swim first, pop the rake back to the car and get the gear and by the time I am set up there are already carp inquisitively drifting around the swim 😎
Quote: I am always surprised with how quickly carp (not just tench) can zone in on an area where naturals have been disrupted with a rake.
Yeah, I am never that bothered about disturbing the fish...more so, other anglers who'd not take too kindly to me hurling a Jakes Rake around like a lunatic!!
I sometimes fish a farm pond and if no one is there I will rake the swim first, pop the rake back to the car and get the gear and by the time I am set up there are already carp inquisitively drifting around the swim 😎
In reply to Post #8
Camo taping the lovely Wolf handle though...I thought you were alright until I saw that 😂
Only joking 😉
Camo taping the lovely Wolf handle though...I thought you were alright until I saw that 😂
Only joking 😉
In reply to Post #9
Quote: Camo taping the lovely Wolf handle though...I thought you were alright until I saw that
The damn thing was red and yellow, ffs .......can't have that.....out with the tape and crisis averted😀 *phew*
Quote: Camo taping the lovely Wolf handle though...I thought you were alright until I saw that
The damn thing was red and yellow, ffs .......can't have that.....out with the tape and crisis averted😀 *phew*
In reply to Post #10
😂👍
😂👍
the tench boys rake spots quite regularly on the club water, sometimes it works out hopping on a day or two afterwards for the carp..other times not.
In reply to Post #7
The one thing I've not worked out is how to rake a spot from a boat and I'm sure I'm missing a trick. I've seen rakes on extendable poles but ones I've used you can't get enough purchase on the deck. If anyone's come up with a solution to that I'd be all ears
The one thing I've not worked out is how to rake a spot from a boat and I'm sure I'm missing a trick. I've seen rakes on extendable poles but ones I've used you can't get enough purchase on the deck. If anyone's come up with a solution to that I'd be all ears
In reply to Post #13
Make something like mine (heavy) and chuck it. 👍
Make something like mine (heavy) and chuck it. 👍
In reply to Post #13
The one thing I've not worked out is how to rake a spot from a boat and I'm sure I'm missing a trick
Put the rake down, move the boat away to lessen the angle, pull through swim 👍
The one thing I've not worked out is how to rake a spot from a boat and I'm sure I'm missing a trick
Put the rake down, move the boat away to lessen the angle, pull through swim 👍
In reply to Post #15
The problem I find is that with the boat moving, I am never sure I am taking the same spot. Using a marker can cause all sorts of problem!
The problem I find is that with the boat moving, I am never sure I am taking the same spot. Using a marker can cause all sorts of problem!
In reply to Post #9
I did camo tape my first one, but when I bought the longer version I didn't bother. It's like the Jan Porter of rakes 😂
I did camo tape my first one, but when I bought the longer version I didn't bother. It's like the Jan Porter of rakes 😂
In reply to Post #17
Your rake's a legend 😂😎
Your rake's a legend 😂😎
In reply to Post #16
Sounds similar to the problem I have faced. A heavy rake on a rope you end up just pulling the boat towards the rake and angles don't seem to make a difference in my experience. It could be that a lighter rake might actually help come to think of it.
Sounds similar to the problem I have faced. A heavy rake on a rope you end up just pulling the boat towards the rake and angles don't seem to make a difference in my experience. It could be that a lighter rake might actually help come to think of it.
In reply to Post #19
Regards your comment on the boat being pulled, and a previous comment about the boat moving in the wind, I took it for granted you'd be putting a anchor down to prevent either, to me it's just common sense.
As for angles, if pulling from closer to vertical your not raking the bottom, more gliding across it with tines horizontal, o.k for silk weed I suppose and depends on the rake.
Regards your comment on the boat being pulled, and a previous comment about the boat moving in the wind, I took it for granted you'd be putting a anchor down to prevent either, to me it's just common sense.
As for angles, if pulling from closer to vertical your not raking the bottom, more gliding across it with tines horizontal, o.k for silk weed I suppose and depends on the rake.
Back in the 70's I had a brilliant "Weed Cutter" that not only cut the weed but dragged the bottom at the same time.
I don't know what it actually was , but it was strip of metal about a yard long by 2" wide and only about 3mm thick that tapered to almost 1mm, it basically resembled a carpet strip you have in a doorway to fasten a carpet down. It may even have been one.
I cannot recall how I fastened it to the "Rope", but when I pulled it in, it would dive downwards and you could feel the drag on it as it was like a "Diving Vane" and hug the bottom tight and not leave it, it would send up "Showers" of bubbles and cut weed right down to the bottom of the pond and leave nothing poking up. When you saw it working in clear shallow water, you could see the "Arms" to the left and right of the rope flex downwards with the drag.
All weed cut would float to the surface and drift off or just throw the drag over it and pull it all in.
It was only about 3 years ago I found it in the garden and it had corroded badly and I threw it away along with another homemade one I pulled out of a pond that someone had lost. I havent had need for a drag / Weedcutter for years, but if I did, that is what I would be looking to make.
I don't know what it actually was , but it was strip of metal about a yard long by 2" wide and only about 3mm thick that tapered to almost 1mm, it basically resembled a carpet strip you have in a doorway to fasten a carpet down. It may even have been one.
I cannot recall how I fastened it to the "Rope", but when I pulled it in, it would dive downwards and you could feel the drag on it as it was like a "Diving Vane" and hug the bottom tight and not leave it, it would send up "Showers" of bubbles and cut weed right down to the bottom of the pond and leave nothing poking up. When you saw it working in clear shallow water, you could see the "Arms" to the left and right of the rope flex downwards with the drag.
All weed cut would float to the surface and drift off or just throw the drag over it and pull it all in.
It was only about 3 years ago I found it in the garden and it had corroded badly and I threw it away along with another homemade one I pulled out of a pond that someone had lost. I havent had need for a drag / Weedcutter for years, but if I did, that is what I would be looking to make.
Reading ALL pages