Hi guys, just wanted to ask about your preferences for bite indicators with the delkim alarms, I can imagine that the Nitelite indicators are a little awkward to use as i suppose you have to remove the carbon arms whenever you pack down, are they strong enough to last a season or 2 or does the bits end up damaged/lost? Also do they drain the batteries a lot ?
Cheers
Steve
Cheers
Steve
Having used Solars indicator systems for years I moved over to the delkim indicator range and the slim lite has been superb. However the MPS defiant is the best imho.
In reply to Post #1
To be fair they are brilliant.....
Don't make much difference to battery life at all and they are strong enough for sure.
Whether or not £38 each is reasonable I'm not too sure but they are defo a really good bit of kit and very well thought out.
Love mine
To be fair they are brilliant.....
Don't make much difference to battery life at all and they are strong enough for sure.
Whether or not £38 each is reasonable I'm not too sure but they are defo a really good bit of kit and very well thought out.
Love mine
I use the slim lite indicators on my delkims and tbh I think they are brilliant, I love mine they don't effect battery life that much. The carbon arms unclip anyway so it's easy to take off when packing down.
I wouldn't use any others they really are brilliant, are they worth it? I would definitely say yes and would buy them again tomorrow if I had to, but it's your decision if you think they are or not
Never had a problem with mine they are still working fine and had them for a couple years now, just changed the alarms when the new ones came out
I wouldn't use any others they really are brilliant, are they worth it? I would definitely say yes and would buy them again tomorrow if I had to, but it's your decision if you think they are or not
Never had a problem with mine they are still working fine and had them for a couple years now, just changed the alarms when the new ones came out
In reply to Post #2
Cheers, I have MPS stuff already, and will probably use that when i eventually get out, but if this lock down carries on i expect ill be forced to buy some delk ones out of boredom , Ive noticed the delkim say the slim lite is not for extreme range but im guessing thats just becouse of the weight is lighter than the nite lite version is that correct? Ive seen loads on the bank but never really paid attention to other peoples alarms.
Cheers, I have MPS stuff already, and will probably use that when i eventually get out, but if this lock down carries on i expect ill be forced to buy some delk ones out of boredom , Ive noticed the delkim say the slim lite is not for extreme range but im guessing thats just becouse of the weight is lighter than the nite lite version is that correct? Ive seen loads on the bank but never really paid attention to other peoples alarms.
In reply to Post #3
thanks , appreciate the input
thanks , appreciate the input
In reply to Post #5
Tbh I've always preferred lighter bobbins so the slim lite are my preferred choice
Tbh I've always preferred lighter bobbins so the slim lite are my preferred choice
In reply to Post #6
Having always had Fox swingers of one form or another I now have the ES sets and love them, especially with the extra weights you can add. Never really seen the point in just bobbins that can blow about all over the place, apart from being 'Carpy' of course
Having always had Fox swingers of one form or another I now have the ES sets and love them, especially with the extra weights you can add. Never really seen the point in just bobbins that can blow about all over the place, apart from being 'Carpy' of course
In reply to Post #5
I have used it to 100 plus yards and it's alright with the added weights although the scorpion arm would be preferable etc
I've prefer them for slack lining short to medium range.
I have used it to 100 plus yards and it's alright with the added weights although the scorpion arm would be preferable etc
I've prefer them for slack lining short to medium range.
In reply to Post #1
I dont take the arms off, I leave them on and they fold on top of the protective case, I only disconnect the Nitelite indicators. Ive never had any issues with them breaking or any damage, I can see them lasting many years, not just a season or two. The battery life would be a year at least.
I dont take the arms off, I leave them on and they fold on top of the protective case, I only disconnect the Nitelite indicators. Ive never had any issues with them breaking or any damage, I can see them lasting many years, not just a season or two. The battery life would be a year at least.
In reply to Post #10
I don't even go that far, leave the whole lot connected and put them in a pocket on the rucksack
I don't even go that far, leave the whole lot connected and put them in a pocket on the rucksack
Only thing that niggles me, is that clip rusts.
In reply to Post #10
Same as that. Leave the arms attached. Always remove the indicators. Never had a problem.
I love mine. Costly, but worth it (to me). And battery life is great, although mine don't go off that often.
Same as that. Leave the arms attached. Always remove the indicators. Never had a problem.
I love mine. Costly, but worth it (to me). And battery life is great, although mine don't go off that often.
Like anything in life if you enjoy them and they work they are worth it. Are they necessary only you can answer that?
In reply to Post #12
Which bit rusts?
Which bit rusts?
In reply to Post #15
The actual line gripping part, it's either rust or muck,looks like rust to me
The actual line gripping part, it's either rust or muck,looks like rust to me
In reply to Post #16
If that's on the NiteLite Pro it must be muck as it's small stainless steel magnetic balls as far as I know
If that's on the NiteLite Pro it must be muck as it's small stainless steel magnetic balls as far as I know
In reply to Post #8
Like the look of the ES ones or the the older white type slimlites. Hopefully getting my delks this week so no doubt ill be buying one of those sets before this virus malarkey is over and i can get out on the bank. And then i will hopefully have found my forever alarms
Like the look of the ES ones or the the older white type slimlites. Hopefully getting my delks this week so no doubt ill be buying one of those sets before this virus malarkey is over and i can get out on the bank. And then i will hopefully have found my forever alarms
In reply to Post #18
then theres the cost of snag ears, extra d weights , oh joy
if this lasts too long Ill be forced to set the pod up in the garden to have a look
then theres the cost of snag ears, extra d weights , oh joy
In reply to Post #19
yeah you have to have all the bits and bobs
the line clips are a must as well
yeah you have to have all the bits and bobs
the line clips are a must as well
In reply to Post #17
If it has a magnetic stainless steel ball it probably contains iron to make it magnetic and can therefore rust.
If it has a magnetic stainless steel ball it probably contains iron to make it magnetic and can therefore rust.
In reply to Post #21
Yep, pure stainless isn't magnetic, low end stainless steel has some magnetivity but not that much. So more than likely just steel ball bearings, possibly coated when built.
Don't take this for gospel lol
Yep, pure stainless isn't magnetic, low end stainless steel has some magnetivity but not that much. So more than likely just steel ball bearings, possibly coated when built.
Don't take this for gospel lol
In reply to Post #22
All steel is magnetic to varying degrees, even top quality stainless. All steels contain iron. It's nickel/chromium that prevents stainless steel from rusting - it is made up of at least 50% iron.
All steel is magnetic to varying degrees, even top quality stainless. All steels contain iron. It's nickel/chromium that prevents stainless steel from rusting - it is made up of at least 50% iron.
In reply to Post #23
That variation is huge though, the magnet I use for stud finding takes two hands to get off an rsj but barely pulls at all on decent stainless, it wouldn't even support its own weight
That variation is huge though, the magnet I use for stud finding takes two hands to get off an rsj but barely pulls at all on decent stainless, it wouldn't even support its own weight
In reply to Post #24
This is true. It all depends of the type of stainless. Austenitic is less magnetic. Martensitic more so.
This is true. It all depends of the type of stainless. Austenitic is less magnetic. Martensitic more so.
In reply to Post #26
That looks ****, is it damaging line?
Very poor for those prices
That looks ****, is it damaging line?
Very poor for those prices
In reply to Post #26
I thought mine had started to rust last week so I decided to give them a clean with a small bristle brush and its cleaned them right up. I got my magnifying glass out and the magnets have tiny indentations in them and the dirt must have got in to them. I got mine soon after they were release and no rust yet.
I thought mine had started to rust last week so I decided to give them a clean with a small bristle brush and its cleaned them right up. I got my magnifying glass out and the magnets have tiny indentations in them and the dirt must have got in to them. I got mine soon after they were release and no rust yet.
In reply to Post #26
Even where the weights screw on it looks like rust on the thread.Have you contacted Delkim
Even where the weights screw on it looks like rust on the thread.Have you contacted Delkim
In reply to Post #27
No I don't use the fixed line clip normally?
No I don't use the fixed line clip normally?
In reply to Post #29
Might give them a mail👍
Might give them a mail👍
In reply to Post #30
That maybe why, looks like dirt to me.
That maybe why, looks like dirt to me.
In reply to Post #32
It looks like corrosion to me mate, I think the Delkim storage tube I keep them in, may be playing a part in all this. I've mailed them so we're see.
It looks like corrosion to me mate, I think the Delkim storage tube I keep them in, may be playing a part in all this. I've mailed them so we're see.
In reply to Post #33
All Slimlites do this
All Slimlites do this
In reply to Post #21
All the stuff you get from keith comes with a light covering of machine oil and he knows his stuff.
All the stuff you get from keith comes with a light covering of machine oil and he knows his stuff.
In reply to Post #33
It looks like corrosion to me too,there is some on the weight.Have you packed them away wet in the storage tube
It looks like corrosion to me too,there is some on the weight.Have you packed them away wet in the storage tube
In reply to Post #36
Most probably, don't think I've ever dried a bobbin 👍
Most probably, don't think I've ever dried a bobbin 👍
Bobbins hung on the piss, had corrosion, metal balls wouldn't roll with the line. Got rid and went with elstow bobbins with mcf chain
In reply to Post #37
You know delkim will tell you to dry them and put them in a nice warm place between trips
You know delkim will tell you to dry them and put them in a nice warm place between trips
In reply to Post #39
👍
👍
In reply to Post #39
We should do that with all our gear, do we actually do it...
😖😱😅😉
We should do that with all our gear, do we actually do it...
😖😱😅😉
In reply to Post #41
Always fully dry all my gear, alarms, swingers, even unzip my rod holdall to let the reels/spools fully dry.
Always fully dry all my gear, alarms, swingers, even unzip my rod holdall to let the reels/spools fully dry.
In reply to Post #26
Ah right, those aren't the ones I have anyway, I have the Nitelite Pros.......
Ah right, those aren't the ones I have anyway, I have the Nitelite Pros.......
In reply to Post #43
In the scheme of things, it's no biggie 👍
In the scheme of things, it's no biggie 👍
In reply to Post #2
"Having used Solars indicator systems for years I moved over to the delkim indicator range and the slim lite has been superb. However the MPS defiant is the best imho."
What ones are you using? ... I am looking at them.
"Having used Solars indicator systems for years I moved over to the delkim indicator range and the slim lite has been superb. However the MPS defiant is the best imho."
What ones are you using? ... I am looking at them.
Just had 3 slim lites turn up today. Look spot on, cant get the blue one to work for the life of me though. Had 3 sent from AD but one seems not to light up.
AD have said they will replace but dont sound great from a quality view..
AD have said they will replace but dont sound great from a quality view..
In reply to Post #46
Make sure you have pushed it in the whole way and spin the connector round may work....
If not it's defo faulty
Make sure you have tried it that one of the other alarms as well just to see if it isn't the alarm itself
Just trying to help
Make sure you have pushed it in the whole way and spin the connector round may work....
If not it's defo faulty
Make sure you have tried it that one of the other alarms as well just to see if it isn't the alarm itself
Just trying to help
In reply to Post #47
Yeah tried it on alarms that work tried ones that work on the other alarm and all sorts. Just dont light up.
Cheers though
Yeah tried it on alarms that work tried ones that work on the other alarm and all sorts. Just dont light up.
Cheers though
In reply to Post #48
What my dad used to do with the telly decades ago, give it a good talking to followed by a slap from all directions, don't think it ever worked but made him feel better.
What my dad used to do with the telly decades ago, give it a good talking to followed by a slap from all directions, don't think it ever worked but made him feel better.
In reply to Post #48
Delkim or the shop will replace. Anything mass produced will have the odd issue. Annoying but they are good so once replaced you'll be happy again
Delkim or the shop will replace. Anything mass produced will have the odd issue. Annoying but they are good so once replaced you'll be happy again
In reply to Post #50
Agree.
At which I would like to point out I emailed angling direct and they replied twice within a few hours with an option to replace or refund. Top service.
Agree.
At which I would like to point out I emailed angling direct and they replied twice within a few hours with an option to replace or refund. Top service.
Reading ALL pages