|
|
|
|
In reply to Post #5
You were spot on by the way, they are M6, all sorted now, cheers đź‘Ť
|
|
|
|
|
Thanks for the info chaps, most helpful đź‘Ś
|
|
|
|
In reply to Post #1
Just checked mine.
The bolt is 10mm head size so 6mm thread.
Only just long enough as it is with a Nylock nut.
Might be worth getting slightly longer bolts with nylocks if you just have standard nuts on at present
|
|
|
|
If you still have the bolt just take that to somewhere like b and q and have a look in the pick and mix section.
|
|
|
|
In reply to Post #1
If it's not a royal PITA then you could take out another nut/bolt - then go to your local hardware store (as Paul suggested)
They can test to see what fits from their stock (or you could do the testing if all the nuts/bolts are on display in an aisle)
Something that needs to support bodyweight might be M8
M = Metric
8 = mm
I tend to find most 'stuff' is M6 or M8
If it's a new nut you need then you could get the nylock version so that hopefully it grips better and doesn't wiggle lose.
|
|
|
|
|
I don't know but safe to say 5 or 6mm. Go into a local fixings company and you will probably get one of each for 50p
|
|
|
|
|
Just noticed one of the leg hinge bolts on my Tactical X Compact bedchair has lost it’s nut, I don’t suppose anyone knows what size they are, I don’t have any callipers?
|
|
Tackle