|
|
| | | VLT | | Posts: 8964 |  | |
|
|
Fish adjustables? I haven't found indication to be that bad with my TXI-D's while using adjustable zigs, which are essentially running rigs.
|
|
|
|
In reply to Post #13
I bought a set of Fox RX+ alarms mate. Love them (so far lol).
I have loads of hangers/springers (bit of a fetish, don't ask) but I couldn't fix a better bite indication for slow drop backs on the Delkims.
|
|
|
|
In reply to Post #1
Would dropping the lead and having a high rod tip tip help? I'm no expert on zigs, but with an aggressive angle, any loss of lead coupled with a super heavy bobbin should get a nice steady drop on the bobbin. Coupled with a line clip a few inches behind, you should get decent indication and maintain enough of a tight line between the Delk and reel?
|
|
|
|
In reply to Post #13
I'm pretty sure my issues are because of the type of swingers I'm using but I'm also convinced if a carp is kiting on a tight line through a weed bed that delkims should be picking that up.
Most roller alarms will struggle in that situation too, espesh those designed to rule out see sawing, even had it happen on the old RX, just the odd bleep, the only real option being a vibe setting.
|
|
|
|
In reply to Post #10
Out of interest mate what did you go for in the end?
I'm pretty sure my issues are because of the type of swingers I'm using but I'm also convinced if a carp is kiting on a tight line through a weed bed that delkims should be picking that up.
|
|
|
|
In reply to Post #11
Try fishing a heavy running lead with the same set up
|
|
|
|
In reply to Post #10
Not fishing zigs but I have noticed fishing locked up I barely get any indication too on on my TXI plus.
|
|
|
|
In reply to Post #9
This is the exact reason why I sold my delkims. I also showed the owner of delkim on the carp Zwolle fair that slow drop backs don't register. With heavy, light bobbins or new or old buzzers and y forks.....
|
|
|
|
In reply to Post #8
+1
BUT, I had exactly this happen to me with my TXis, in fact 1 day I watched the springer slowly drop to the floor no indication. I lost a coulpe of good fish at night because of it. I videod it happening and asked Delk, they said the 'head' (y piece sensor) needed replacing. My alarms weren't even that old, maybe 18 months. I got them repaired and moved them on. I believe Delk no longer service TXi and rec Daletronics for repairs.
|
|
|
|
In reply to Post #1
Really, you should be using springer arms for zigs. Failing that, the heaviest bobbin you can get away with, and on the tightest possible line
|
|
|
|
|
I'm constantly amazed watching carp fishing videos how many anglers use light weight bobbins for all fishing situations. Horses for courses.
|
|
|
|
|
A lot of zig takes are drop backs. as mentioned use a heavy bobbin set up to amplify the indication. And make sure the lines as tight as possible. Pull the line by hand until you feel the lead and take on the slack on the spool.
|
|
|
|
In reply to Post #4
Thanks ill have a fiddle around with them, I guess I was just expecting more considering they are vibration sensing vs distance travelled.
|
|
|
|
In reply to Post #3
If there is no drop on the counterweight and no line is coming off the clutch or baitrunner then how is the alarm supposed to sound?
The lack of sensitivity is further amplified if you cast out at an angle as the rod tip then can bend so absorbing any pull on the counterweight and reel.
Then the line goes through weedbeds, further reducing any indication..
I have no idea how heavy your bobbin is, but it needs to be an effective counterweight so there is still some immediate indication at the alarms.
|
|
|
|
In reply to Post #2
Im using the nitelite with the heaviest weight available. Regardless of that though, a fish kiting on a tight line through a weedbed surely should have them singing???
|
|
Tackle