|
|
|
|
In reply to Post #12
That's great info.
I'd seen these 1/4” Double ear O ring clamps before on other gas fittings on camping stove and bbqs but had no idea what they were called.
|
|
|
|
In reply to Post #1
I got a couple from Amazon, around £8 each. Cut the crimp off the old stove, the new ones came with thread at the stove end, cut this off with side cutters, add a short length of shrink tube to stop the wires catching etc. I then used some 1/4” Double ear O ring clamps and crimped these over the stove inlet. Worked a treat
|
|
|
|
In reply to Post #10
Same happened to mine, bought a new stove, I did contemplate a repair but thought it was too dangerous to take a risk !
|
|
|
|
In reply to Post #7
If mine started leaking I'd get the crimped section off, end cutters and junior hacksaw, then find find some suitable tubing.
|
|
|
|
|
Throw away world we live in… was trying to be good as the stove works perfectly
|
|
|
|
In reply to Post #5
i bought one off Amazion for less than £30 (£27) last week
|
|
|
|
In reply to Post #6
Hi that’s it, it’s like crimped but if you pull it does come off and it’s a push on connector fitment. What a pain, loads of screw replacement hoses but just not the push over type.
|
|
|
|
In reply to Post #5
Just under £27 on Amazon.
https://www.amazon.co.uk/dp/B00V344YJA/ref=sspa_dk_detail_6?psc=1&pd_rd_i=B00V344YJA&pd_rd_w=3qqM4&pf_rd_p=395f87e5-7923-465a-b450-eb84f1966add&pd_rd_wg=LBihN&pf_rd_r=RT322NZR2WXHXHDDNRF8&pd_rd_r=97001428-93f1-4e95-8879-bbdbffc62d71&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFaRElQVFg5MU0wUTgmZW5jcnlwdGVkSWQ9QTA1NjUzMTNJOEpEWDhOWjQwQzImZW5jcnlwdGVkQWRJZD1BMDU5NTc1ODJWNDVNRVJUN1U0U0cmd2lkZ2V0TmFtZT1zcF9kZXRhaWwmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
|
|
|
|
Just looked online at the price of a T4 these days. They've gone up a bit. 
Think I paid about 22 quid for mine about 5 years ago. £35 was the cheapest I found. Might be worth trying to source a replacements pipe at that price.. 
|
|
|
|
In reply to Post #1
Just checked my bulin and the hose end looks like a push fit thats then crimped on.
Not sure if it's replaceable like for like. You could use a rubber hose and fit a terry clip, and a gas can adaptor fitting at the other end.
|
|
|
|
In reply to Post #1
Did the same and ended up buying another stove as could not find spares.
|
|
|
|
In reply to Post #1
I had the same problem, just bought a new stove in the end. From memory, I think the new one has a screwed end, so should be replaceable in the future.
|
|
|
|
|
Anyone know where I can’t get a new hose for a Bullin T4 stove? Ive obviously had it to close to my stove and melted the inner core inside the braided outer, it’s leaking. I thought it would be quite straight forwards but it’s actually a push fit on the stove side. I can’t find it anywhere as a replacement.
|
|
