Si_Fisher
Last active 1 day ago
Profile picture
Activity
- Posts
- 1,412
- Registered
- 7 Jan 2010 14:12
- Last posted
- 9 Jan 2026 18:56
Contact details
- Name
- S**** F*****
- Location
- Somerset, ENGLAND
Last posts from this user
Forum / Thread
Post
Date/Time
Forum: Bait
Thread: Brazil Nuts- Crayfish
25 Jun 2025
@ 8:12pm
@ 8:12pm
In reply to Post #1
They still have em unfortunately... 😝
They still have em unfortunately... 😝
Forum: Tackle
Thread: Flextail mozzi repellent lantern
16 Aug 2023
@ 9:57pm
@ 9:57pm
In reply to Post #1
Just using mine for the 3rd night on a session.. Seems to keep the mozzys at bay, not been bit yet, totally silent,
Battery does not last all night but charges up quick off the power pack, or can use it left plugged in.
Lightweight comes in a nice little bag 😂
Only bought it for holiday as the missus gets bad reactions to mozzy bites so will hang if off her hanbag 😁
Had a lifesystems one which is absolutely pants in comparison and the inserts are no longer available.
Just using mine for the 3rd night on a session.. Seems to keep the mozzys at bay, not been bit yet, totally silent,
Battery does not last all night but charges up quick off the power pack, or can use it left plugged in.
Lightweight comes in a nice little bag 😂
Only bought it for holiday as the missus gets bad reactions to mozzy bites so will hang if off her hanbag 😁
Had a lifesystems one which is absolutely pants in comparison and the inserts are no longer available.
Forum: General Carp Discussion
Thread: Bonjela
17 Jun 2023
@ 9:05am
@ 9:05am
In reply to Post #1
Bonjela is good for getting leeches to let go,
Bonjela is good for getting leeches to let go,
Forum: Rigs
Thread: Floss blob
5 Apr 2023
@ 9:01pm
@ 9:01pm
In reply to Post #1
Crays love to chew off the blob for some reason.. Just like they love anything tungsten, and just been general dic4heads.. 😁
Crays love to chew off the blob for some reason.. Just like they love anything tungsten, and just been general dic4heads.. 😁
Forum: Tackle
Thread: Bedchair issue
27 Aug 2022
@ 8:05am
@ 8:05am
In reply to Post #1
My fox duralite was terrible for this, put some eazigrip on the legs which is designed for stopping screwdriver heads slipping in worn screws, it worked for a bit then started slipping again, tried roughing up the area with a file, this didn't work, got rid of it and will never buy fox again due to other issues,
Got a solar one now and the quality is ten fold in comparison, no leg slipping issues at all and a lot comfier...
My fox duralite was terrible for this, put some eazigrip on the legs which is designed for stopping screwdriver heads slipping in worn screws, it worked for a bit then started slipping again, tried roughing up the area with a file, this didn't work, got rid of it and will never buy fox again due to other issues,
Got a solar one now and the quality is ten fold in comparison, no leg slipping issues at all and a lot comfier...
Forum: Tackle
20 Jan 2022
@ 6:18pm
@ 6:18pm
In reply to Post #1
Bloke called Alexandru Lupu, Who runs ALTechnologie does them, he is a very helpful honest bloke. I got some for my Technicat and they worked fine, my mate tried them in his microcat and also worked fine, obviously AT don't recommend this, however with no boat modifications they worked a treat and lasted ages... I had to put a few 5oz leads in the hoppers to make up for the weight difference to stop the props pulling in air and making that slurping sound,
Not sure how this will effect the microcat as they sit quite low anyway, they can't be charged in the boat and require a separate charger which he also supplies, batteries also have a percentage indicator on the top activated by a little push button so you know the power state... Hope this helps...
Oh and the speed increase is huge, I ran mine well trimmed back, it also seemed to drive straighter than when lead batteries were in it, may be due to the batteries constant voltage supply,
Bloke called Alexandru Lupu, Who runs ALTechnologie does them, he is a very helpful honest bloke. I got some for my Technicat and they worked fine, my mate tried them in his microcat and also worked fine, obviously AT don't recommend this, however with no boat modifications they worked a treat and lasted ages... I had to put a few 5oz leads in the hoppers to make up for the weight difference to stop the props pulling in air and making that slurping sound,
Not sure how this will effect the microcat as they sit quite low anyway, they can't be charged in the boat and require a separate charger which he also supplies, batteries also have a percentage indicator on the top activated by a little push button so you know the power state... Hope this helps...
Oh and the speed increase is huge, I ran mine well trimmed back, it also seemed to drive straighter than when lead batteries were in it, may be due to the batteries constant voltage supply,
15 Dec 2021
@ 12:51pm
@ 12:51pm
In reply to Post #16
In that point, I've seen fish spook off h block markers with normal line on, and when changed to thick cord they loved it, even rubbed on it and the float would Bob away like mad, Anyway I digress lol
In that point, I've seen fish spook off h block markers with normal line on, and when changed to thick cord they loved it, even rubbed on it and the float would Bob away like mad, Anyway I digress lol
14 Dec 2021
@ 12:33pm
@ 12:33pm
In reply to Post #13
Just a little thread hi-jack, has anyone ever re-dyed there braid on the spools, 🤷🏻♂️.. Get some colour back in the Korda stuff...
I've used the Noir and it is a very nice braid, sinks very well, holds it colour ok, eventually goes a dark grey which is fine... Casts ok for thick sinking braid, better than the Korda for casting the 20lb version anyway.. Think the Korda comes out on top for abrasion resistance but only slightly... I've tried power pro and didn't rate it at all, and faded very quickly.. I'm sticking with the Korda and the Noir, Korda for boat work noir for casting upto 140 with no shock leader...
Just a little thread hi-jack, has anyone ever re-dyed there braid on the spools, 🤷🏻♂️.. Get some colour back in the Korda stuff...
I've used the Noir and it is a very nice braid, sinks very well, holds it colour ok, eventually goes a dark grey which is fine... Casts ok for thick sinking braid, better than the Korda for casting the 20lb version anyway.. Think the Korda comes out on top for abrasion resistance but only slightly... I've tried power pro and didn't rate it at all, and faded very quickly.. I'm sticking with the Korda and the Noir, Korda for boat work noir for casting upto 140 with no shock leader...
12 Nov 2021
@ 12:55pm
@ 12:55pm
In reply to Post #1
I use a little memory foam pillow shaped to your neck.. It's a travel one and is comfy as started getting sore shoulders when fishin 🤷🏻♂️.. This definitely reduced it slightly, however when it's cold the memory foam fails to expand again, so it's rubbish in the winter.. Not sure if this is the case with all memory foam pillows, I suspect so.. Never seen a temperature warning on one 😂.. Guessing they expect bedrooms to be warmer than a brolly
I use a little memory foam pillow shaped to your neck.. It's a travel one and is comfy as started getting sore shoulders when fishin 🤷🏻♂️.. This definitely reduced it slightly, however when it's cold the memory foam fails to expand again, so it's rubbish in the winter.. Not sure if this is the case with all memory foam pillows, I suspect so.. Never seen a temperature warning on one 😂.. Guessing they expect bedrooms to be warmer than a brolly
Forum: Tackle
Thread: Solar SP C-Tech sleep system
11 Nov 2021
@ 5:06pm
@ 5:06pm
In reply to Post #12
Cheers for the replies 😉
Cheers for the replies 😉