Can anyone recommend a 3D printing service they may know of, or have used?
Just looking for a few small bits, nothing complex.
Just looking for a few small bits, nothing complex.
In reply to Post #1
There's a company who do a copy of the Nash Bushwhacker spoon, but with a thread on the end. Not sure if they do it themsleves or if they outsource it. Can't remember their name, I'll have a quick look.
EDIT - think they're called allthings3d.
There's a company who do a copy of the Nash Bushwhacker spoon, but with a thread on the end. Not sure if they do it themsleves or if they outsource it. Can't remember their name, I'll have a quick look.
EDIT - think they're called allthings3d.
In reply to Post #2
Thanks I'll take a look
Thanks I'll take a look
In reply to Post #3
What are you after mate?
I've got a 3d printer and am happy to run off a few parts.
What are you after mate?
I've got a 3d printer and am happy to run off a few parts.
In reply to Post #2
I know one of the guys who has something to do with the company
The stuff they do it pretty good.
I know one of the guys who has something to do with the company
The stuff they do it pretty good.
In reply to Post #2
2 mates & me bought the bait spoons & after about a year all 3 fell apart from Allthings3D
2 mates & me bought the bait spoons & after about a year all 3 fell apart from Allthings3D
@joe-echo & framey, thank you for the kind offer, much appreciated
I might have cobbled something together but the picture below gives you the idea. I was also thinking about a 3 section but suppose as I've made a 4 I can just use 2 for 1, just means less in the 2 individuals ( I think a 3 way would look good tho!)
It's a Trakker Shallow Glug pot btw, and bodge DeWalt drawer dividers...lol
I might have cobbled something together but the picture below gives you the idea. I was also thinking about a 3 section but suppose as I've made a 4 I can just use 2 for 1, just means less in the 2 individuals ( I think a 3 way would look good tho!)
It's a Trakker Shallow Glug pot btw, and bodge DeWalt drawer dividers...lol
In reply to Post #7
Is it just the dividers you need then? I'm happy to model something up and do a 3 and 4 section.
Are you aiming to have seperate liquids in each section?
Can you send me some dimensions of the pot?
Is it just the dividers you need then? I'm happy to model something up and do a 3 and 4 section.
Are you aiming to have seperate liquids in each section?
Can you send me some dimensions of the pot?
In reply to Post #6
Looks like they are printing in pla which doesn't have uv resistance and is a cheap print material.
Looks like they are printing in pla which doesn't have uv resistance and is a cheap print material.
In reply to Post #8
Thanks for the kind offer Joe, Yes, just dividers, my OCD coming to the fore
Actaully it was more than that, it was about separating dark hook baits from light in case they leach/stain, ie, dark brown and white, most likely when adding extra booster, just a guess but not worth the risk. I don't want to be carrying an entire pot of each, there's simply no need for short day sessions etc. I hadn't thought about it from a perspective of glugged baits......you're giving me ideas...ha ha
I hope that makes sense. I did a good search on the net but couldn't see anything re pot dividers hence posting here.
Thanks for the kind offer Joe, Yes, just dividers, my OCD coming to the fore
Actaully it was more than that, it was about separating dark hook baits from light in case they leach/stain, ie, dark brown and white, most likely when adding extra booster, just a guess but not worth the risk. I don't want to be carrying an entire pot of each, there's simply no need for short day sessions etc. I hadn't thought about it from a perspective of glugged baits......you're giving me ideas...ha ha
I hope that makes sense. I did a good search on the net but couldn't see anything re pot dividers hence posting here.
In reply to Post #11
Should be easy enough to do, especially the 4 section. The 3 section would be easy to print but just takes up room when posting.
If I remember correctly the shallow pots are 150ml and 5cm deep, so should have a diameter of 6cm. If you can confirm that I will send over a design and see if you are happy with it. Should only take an hour or so to print a couple.
I will also look at an idea for a properly separate sections so you can glug multiple baits.
Should be easy enough to do, especially the 4 section. The 3 section would be easy to print but just takes up room when posting.
If I remember correctly the shallow pots are 150ml and 5cm deep, so should have a diameter of 6cm. If you can confirm that I will send over a design and see if you are happy with it. Should only take an hour or so to print a couple.
I will also look at an idea for a properly separate sections so you can glug multiple baits.
In reply to Post #11
DP again?
DP again?
In reply to Post #12
Just me thinking aloud Joe, slightly more complicated re the 3 section. 3 vanes connected with a c shape Y piece top and bottom, maybe each arm only 10mm long, the Y need only be a few mm deep re posting.
You are correct re the capacity, I'll take some measurements in a while and get back to you. There is a small central bump in the pot, my efforts just sitting on it but I suppose a indent on the vane would sort it. More work and if I'm honest, not a biggie for me as is.
Just me thinking aloud Joe, slightly more complicated re the 3 section. 3 vanes connected with a c shape Y piece top and bottom, maybe each arm only 10mm long, the Y need only be a few mm deep re posting.
You are correct re the capacity, I'll take some measurements in a while and get back to you. There is a small central bump in the pot, my efforts just sitting on it but I suppose a indent on the vane would sort it. More work and if I'm honest, not a biggie for me as is.
In reply to Post #13
Sent you a pm Joe
Sent you a pm Joe
In reply to Post #11
I don't want to be carrying an entire pot of each, there's simply no need for short day sessions etc
I use half height tubs instead of the full height pop ups tubs. This means I can get 12 tubs into my popup bag instead of 6.
In the van I'll have a pot or two of my most used/favourite flavours, then if I run out I can top the pots back up.
I mix colours. e.g. I have some pineapple pop ups in yellow, and some in pink. Also different sizes. I mix them up in the same half-height pot as I don't use that flavour much.
Also, with Mainline Frutella the wafters are a lighter colour than the popups, so popups and wafters go in the same tub as I can tell them apart (rig gets checked in the margin if I am not 100% sure)
Not sure if the tubs I use would be glug proof/water tight though. The Korda infusers I bought ages ago when they first came out weren't :( Shame because I thought they would be useful
Korda Infuza link
Fox half height tubs
I don't want to be carrying an entire pot of each, there's simply no need for short day sessions etc
I use half height tubs instead of the full height pop ups tubs. This means I can get 12 tubs into my popup bag instead of 6.
In the van I'll have a pot or two of my most used/favourite flavours, then if I run out I can top the pots back up.
I mix colours. e.g. I have some pineapple pop ups in yellow, and some in pink. Also different sizes. I mix them up in the same half-height pot as I don't use that flavour much.
Also, with Mainline Frutella the wafters are a lighter colour than the popups, so popups and wafters go in the same tub as I can tell them apart (rig gets checked in the margin if I am not 100% sure)
Not sure if the tubs I use would be glug proof/water tight though. The Korda infusers I bought ages ago when they first came out weren't :( Shame because I thought they would be useful
Korda Infuza link
Fox half height tubs