8roker
Last active 1062 days ago
Profile picture
Activity
- Posts
- 18
- Registered
- 3 Sep 2016 13:59
- Last posted
- 18 May 2023 20:55
Contact details
- Name
- S***** S*******
- Location
- Kiev, Ukraine
Last posts from this user
Forum / Thread
Post
Date/Time
Forum: Tackle
Thread: Daiwa 20 qd45 sqw
18 May 2023
@ 8:55pm
@ 8:55pm
In reply to Post #1
https://youtu.be/bMEUmdQe1iY
To upgrade line roller you will need 2 bearings 5*8*2,5 plus you can add rubber bearing covers
https://youtu.be/bMEUmdQe1iY
To upgrade line roller you will need 2 bearings 5*8*2,5 plus you can add rubber bearing covers
Forum: Tackle
Thread: Emblem 45 SCW - Drag Adjustment
14 Jun 2021
@ 11:46pm
@ 11:46pm
In reply to Post #1
You can change your drag knob from QD to QDM
http://www.daiwa.de/dw/en/67/353/7702/5,1,74,75,1,2__products-model.htm?ovs_prdrows2=10
It will change drag from 1/4 turn from open to closed to 3/4
Carbon washers doesn't change anything
You can change your drag knob from QD to QDM
http://www.daiwa.de/dw/en/67/353/7702/5,1,74,75,1,2__products-model.htm?ovs_prdrows2=10
It will change drag from 1/4 turn from open to closed to 3/4
Carbon washers doesn't change anything
Forum: Tackle
Thread: Ultegras - Confused!
14 Mar 2021
@ 4:45pm
@ 4:45pm
1st letter: X - power reel
2nd letter: T/S. T- carp reel (fresh water) S - surf reel (salt water)
3rd letter: A,B,C,D... (A-first generation, B-second generation, C- third generation and so on), so A,B and C is an old reels. Actual model is D.
And ci4 + go according to their own. A and B models is out to date. C is an actual model.
2nd letter: T/S. T- carp reel (fresh water) S - surf reel (salt water)
3rd letter: A,B,C,D... (A-first generation, B-second generation, C- third generation and so on), so A,B and C is an old reels. Actual model is D.
And ci4 + go according to their own. A and B models is out to date. C is an actual model.
Forum: Tackle
Thread: Daiwa Basia 17 45 SLD advice
19 Jan 2021
@ 11:16pm
@ 11:16pm
In reply to Post #13
The black thing is a sticker for reel. You should use it when your rod have carbon reel seat or Shimano type (TX2, TX5).
Add one red washer and the line lay will be perfect.
The black thing is a sticker for reel. You should use it when your rod have carbon reel seat or Shimano type (TX2, TX5).
Add one red washer and the line lay will be perfect.
Forum: Tackle
Thread: Daiwa Basia 17 45 SLD advice
19 Jan 2021
@ 12:02pm
@ 12:02pm
In reply to Post #5
All, that you can do, just add some ball bearings to your reel.
If you have SLD QDX you can add 3 bearings (2 in line roller and one in the support of the worm shaft)
If you have SLD QD you can add 4 ball bearings (2 in line roller, 1 in the support of the worm shaft, 1 in knob) and of course you can change wooden handle.
Maybe later Weston will do slow oscillation. Will see...
All, that you can do, just add some ball bearings to your reel.
If you have SLD QDX you can add 3 bearings (2 in line roller and one in the support of the worm shaft)
If you have SLD QD you can add 4 ball bearings (2 in line roller, 1 in the support of the worm shaft, 1 in knob) and of course you can change wooden handle.
Maybe later Weston will do slow oscillation. Will see...
Forum: Tackle
Thread: Daiwa Basia 17 45 SLD advice
19 Jan 2021
@ 7:56am
@ 7:56am
In reply to Post #1
Weston don't have slow oscillation worm shafts for Basia SLD. I have ordered mine from SCR and it doesn't fit (it's longer than the original one). So I ask Andy about it and he said that his worm shafts are not suitable for SLD.
Weston don't have slow oscillation worm shafts for Basia SLD. I have ordered mine from SCR and it doesn't fit (it's longer than the original one). So I ask Andy about it and he said that his worm shafts are not suitable for SLD.
Forum: Tackle
Thread: Delk txid led’s
1 Jun 2020
@ 2:58pm
@ 2:58pm
In reply to Post #1
LED BRIGHTNESS ADJUST
Allows LED brightness to be set to personal preference in
both Day/Night modes. First select the Day/Night mode
to be adjusted. Press and hold PB2 to cycle through the
8 brightness levels from 1 – 8 (min – max). Release PB2
at required brightness. When brightness 8 is reached it is
confirmed by continual repetition of the info tone. To reset
simply repeat the process. Memorised setting
LED BRIGHTNESS ADJUST
Allows LED brightness to be set to personal preference in
both Day/Night modes. First select the Day/Night mode
to be adjusted. Press and hold PB2 to cycle through the
8 brightness levels from 1 – 8 (min – max). Release PB2
at required brightness. When brightness 8 is reached it is
confirmed by continual repetition of the info tone. To reset
simply repeat the process. Memorised setting
Forum: Tackle
26 Mar 2020
@ 10:49pm
@ 10:49pm
Its called ON INDICATOR
Delkim puts additional instructions with the new receiver (01/20 manufacture date)
"To turn OFF the ON INDICATOR. Switch ON keeping all three PBs held down until two beeps are heard then immediatly release. Press PB2, the RX-D flashes twice and restart. To turn the feature back ON just repeat the process."
But I think its will work only with new receivers or updated one
Delkim puts additional instructions with the new receiver (01/20 manufacture date)
"To turn OFF the ON INDICATOR. Switch ON keeping all three PBs held down until two beeps are heard then immediatly release. Press PB2, the RX-D flashes twice and restart. To turn the feature back ON just repeat the process."
But I think its will work only with new receivers or updated one