Anybody using the ogx mainline 0.37mm any reviews ? is it wirey ?
In reply to Post #1
No its not wirey,only just spooled up with it so can't give any user feedback yet.Its very supple and limp
No its not wirey,only just spooled up with it so can't give any user feedback yet.Its very supple and limp
Toying with giving this a go myself this upcoming season.
Just trying to find out if we have a minimum breaking strain/dia on the new syndicate.
I usually like at least 0 40 dia but that would mean 20lb with this.
Just trying to find out if we have a minimum breaking strain/dia on the new syndicate.
I usually like at least 0 40 dia but that would mean 20lb with this.
Used it a while, switched from gthd. I like it personally
In reply to Post #3
All this different diameter to b.s is getting crazy,ogx 18lb is 0.37mm,syncro xt 15lb is 0.37mm then korda subline 15lb is 0.40mm.I normally go off diameter and as syncro 15lb is 0.37mm I went for that in ogx and it feels really supple and went on my reels lovely
All this different diameter to b.s is getting crazy,ogx 18lb is 0.37mm,syncro xt 15lb is 0.37mm then korda subline 15lb is 0.40mm.I normally go off diameter and as syncro 15lb is 0.37mm I went for that in ogx and it feels really supple and went on my reels lovely
In reply to Post #5
I know what you mean mate. GR60 15lb is 0.40, that's why I asked the question to the Bailiffs at the syndicate. I doubt they would be coming round with a macrometer to check but as it's my first year on there , I thought it was best to check.
15lb seems to be out of stock a lot it seems.
I'm going to go for the 18lb.
Any deals out there? Best I've found is on the bay at £21.45 p&p inc.
I know what you mean mate. GR60 15lb is 0.40, that's why I asked the question to the Bailiffs at the syndicate. I doubt they would be coming round with a macrometer to check but as it's my first year on there , I thought it was best to check.
15lb seems to be out of stock a lot it seems.
I'm going to go for the 18lb.
Any deals out there? Best I've found is on the bay at £21.45 p&p inc.
In reply to Post #6
Thats what I paid
Thats what I paid
In reply to Post #5
For any consistency the lakes should make their line restrictions in diameter rather than BS. BS is just that in most cases.
One of my water is 15lb minimum mono and 15lb minimum braid. Makes no sense.
A 16lb mono could be 0.33mm diameter (Fox Exocet) or .a 15lb could be 0.40mm (GR60)
Even worse 15lb whiplash is stated as 0.14mm, totally unacceptable for fishing for carp but you are within the rules.
The safe diameter is open to debate, but I would have thought something like 0.35mm minimum mono and 0.30mm minimum braid would be safe and sensible.
For any consistency the lakes should make their line restrictions in diameter rather than BS. BS is just that in most cases.
One of my water is 15lb minimum mono and 15lb minimum braid. Makes no sense.
A 16lb mono could be 0.33mm diameter (Fox Exocet) or .a 15lb could be 0.40mm (GR60)
Even worse 15lb whiplash is stated as 0.14mm, totally unacceptable for fishing for carp but you are within the rules.
The safe diameter is open to debate, but I would have thought something like 0.35mm minimum mono and 0.30mm minimum braid would be safe and sensible.
In reply to Post #8
Yes it should be by diameter as lines are rated differently another example is pb products 24lb 0.35mm dia and gr60 12lb 0.35mm dia yet both have very similar knot strengths
Yes it should be by diameter as lines are rated differently another example is pb products 24lb 0.35mm dia and gr60 12lb 0.35mm dia yet both have very similar knot strengths
In reply to Post #8
My club has max b.s 15lb max dia 0.37 I use either shimano technium 12lb or synchro xt 15lb. Depending on distance required.
My club has max b.s 15lb max dia 0.37 I use either shimano technium 12lb or synchro xt 15lb. Depending on distance required.
In reply to Post #4
How do you find it compares to GT HD in terms of casting , sinking etc Anyone else give any comparisons to ther lines syncro maybe ?
How do you find it compares to GT HD in terms of casting , sinking etc Anyone else give any comparisons to ther lines syncro maybe ?
I'm looking to buy OGX for any long cast fishing I do .
I think I'd go with the 12lb option.
I'd be grateful to hear how people are finding it .
I think I'd go with the 12lb option.
I'd be grateful to hear how people are finding it .
In reply to Post #10
they have a maximum rule or a minimum rule? Seems strange to have a max breaking strain rule
they have a maximum rule or a minimum rule? Seems strange to have a max breaking strain rule
In reply to Post #13
Yes. I agree it does seem strange, but max 15lb or 0.37mm dia.
Also max lead size of 4oz. Which does make sense given the line limits.
No leaders. No braided line. No rigmarole tubing. No Nash snowman bait screws. No artificial baits of any kind including zigs. I can see the point of the last two.
Yes. I agree it does seem strange, but max 15lb or 0.37mm dia.
Also max lead size of 4oz. Which does make sense given the line limits.
No leaders. No braided line. No rigmarole tubing. No Nash snowman bait screws. No artificial baits of any kind including zigs. I can see the point of the last two.
In reply to Post #14
Absolutely - the no artificial bait rule should be applied on all waters IMO - there's no need to use plastic these days with the range of hookbaits available
Absolutely - the no artificial bait rule should be applied on all waters IMO - there's no need to use plastic these days with the range of hookbaits available
In reply to Post #14
A lot of people using bait screws and cork ball pop ups inadvertently break the last rule, my syndicate allows cork but must be tied even plugged bits which makes sense.
It's why I think supergluing cork to hooks for surface rigs is stupid
A lot of people using bait screws and cork ball pop ups inadvertently break the last rule, my syndicate allows cork but must be tied even plugged bits which makes sense.
It's why I think supergluing cork to hooks for surface rigs is stupid
In reply to Post #3
pretty much any line sold at a diameter of 0.40 will break in the 20lb area.
GR60 was always regarded so highly for its abrasion resistant purely due to the fact it was massively misbranded. An 0.40 15lb line? not a chance.. IIRC GR 0.40 has broken as highly as 24lb in some cases. there are far better lines out there with regards to abrasion resistance BY DIAMETER, not stated breaking strain - such as GTHD.
always best to buy off diameter really. 0.35 will be a much more accurately rated 15lb line.
pretty much any line sold at a diameter of 0.40 will break in the 20lb area.
GR60 was always regarded so highly for its abrasion resistant purely due to the fact it was massively misbranded. An 0.40 15lb line? not a chance.. IIRC GR 0.40 has broken as highly as 24lb in some cases. there are far better lines out there with regards to abrasion resistance BY DIAMETER, not stated breaking strain - such as GTHD.
always best to buy off diameter really. 0.35 will be a much more accurately rated 15lb line.
I've literally just spooled up with OGX this morning .
First impression is it's a very limp soft line and easy to handle .
Nice trans green that darkens with moisture.
I've used one 1000 metre spool and done 3 spools with plenty spare .
It's got markers on so you also know where you're at .
I soaked it for an hour in Luke warm water , however it was limp and soft as soon as I opened the tin .
I may not even use it this season as I like to fish braid at medium range , however it's in the armoury now should I need it .
First impression is it's a very limp soft line and easy to handle .
Nice trans green that darkens with moisture.
I've used one 1000 metre spool and done 3 spools with plenty spare .
It's got markers on so you also know where you're at .
I soaked it for an hour in Luke warm water , however it was limp and soft as soon as I opened the tin .
I may not even use it this season as I like to fish braid at medium range , however it's in the armoury now should I need it .
I'm also considering changing from my current GTHD any more updates now people have been using it a while?
In reply to Post #19
I've just spooled up with it and out for a 48 tomorrow, Will let you know how it performs.
Went on the spools nice and seemed supple
I've just spooled up with it and out for a 48 tomorrow, Will let you know how it performs.
Went on the spools nice and seemed supple
In reply to Post #19
I've have had it on my reels the past 2 seasons (2nd season now).
Went on lovely, landed fish up to 40lb from a snaggy pit etc. Was very happy with it.
Had no issues with it up until the past 2 sessions.
I have a massive amount of line twist now. Struggling to get it out. I have stripped and topped up with some new line off the spool and I still have it. Going to walk the lines out over the field over the weekend, give them a good stretch and wind back on under tension to see how it goes.
I think I have read a few others having the same but this is new for me.
If I can't get it out I'll probably go back to either GR60 or good old Sensor as I had no issues with either of those. Just fancied a change when I initially tried the OGX.
I've have had it on my reels the past 2 seasons (2nd season now).
Went on lovely, landed fish up to 40lb from a snaggy pit etc. Was very happy with it.
Had no issues with it up until the past 2 sessions.
I have a massive amount of line twist now. Struggling to get it out. I have stripped and topped up with some new line off the spool and I still have it. Going to walk the lines out over the field over the weekend, give them a good stretch and wind back on under tension to see how it goes.
I think I have read a few others having the same but this is new for me.
If I can't get it out I'll probably go back to either GR60 or good old Sensor as I had no issues with either of those. Just fancied a change when I initially tried the OGX.
I had nothing but issues with it,had a massive birds nest on a cast.I stripped the lot off and went back to syncro
In reply to Post #20
Had same trouble get a spin doctor worked a treat
Had same trouble get a spin doctor worked a treat
In reply to Post #23
Yep, got one of them and that will be used.
Easier for me to walk them out in the field outside my house than find the time to get down the lake and not get in anybody's way.
Yep, got one of them and that will be used.
Easier for me to walk them out in the field outside my house than find the time to get down the lake and not get in anybody's way.
Anyone compared the Nash bullet mono to the thinking anglers?
In reply to Post #15
I struggle to understand the no artificial bait rules and cork bans, how many people use bait companies that produce high boyancy popups made with Glass bubbles then throw this in the water when putting fresh on?
would it also be fair to say that attached to an artificial bait is a sharp bent piece of metal that could do far more damage if ingested?
Just seems bizarre to me
I struggle to understand the no artificial bait rules and cork bans, how many people use bait companies that produce high boyancy popups made with Glass bubbles then throw this in the water when putting fresh on?
would it also be fair to say that attached to an artificial bait is a sharp bent piece of metal that could do far more damage if ingested?
Just seems bizarre to me
In reply to Post #26
The issue with artificials is should you snap or get cut off the rig is potentially fishing for ever
The issue with artificials is should you snap or get cut off the rig is potentially fishing for ever
In reply to Post #26
Every days a school day
Every days a school day
looking at buying Thinking Anglers OGX Copolymer Mainline 18lb 0.37mm 1000m
now its 2026 what are your guys thoughts on this line, cos my research is telling lines change (for the worst) so much in a short time frame....
now its 2026 what are your guys thoughts on this line, cos my research is telling lines change (for the worst) so much in a short time frame....
One of the best imo
Reading ALL pages