CarpForum.co.uk brand mark, a blue stylized fish with a white eye and a smooth modern look, set in the site header against a clean background CarpForum.co.uk wordmark in a bold flowing script style, reading CarpForum.co.uk, displayed in the site header
Menu
Utils
Go Premium Who's Online Members Weather Photo Gallery Articles
Account
Login
Waterproofing a tempest (8 posts / 1,464 views)
devon157
Posts: 1,144
#1 10 Sep 2024 18:27
0
As above, I'm looking to waterproof my tempest and probably my jacket aswell ,what would you guys recommend using ?
framey framey
Posts: 5,316
#2 10 Sep 2024 18:41
0
In reply to Post #1
Fabsil gold for the tempest and probably nikwax for the jacket
Depends on what the jacket is made of though

https://www.nikwax.com/en-gb/waterproofing/
jimimak jimimak
Posts: 1,762
#3 11 Sep 2024 08:47
0
In reply to Post #2
Yep - Nikwax and Fabsil are what you want.

For your jacket they do the tech wash as well as the TX direct. Follow the instructions though, i.e. clean out the detergent drawer and do a couple of rinse runs with an empty machine. If you try to wash your jacket with normal washing detergent and softener you''ll likely ruin your jacket.

With the Fabsil for the tempest (or any shelter for that matter), get yourself one of those hand spray pumps for watering house plants. Doesnt have to be an expensive one - makes the job a breeze - just set your shelter up on a dry day, hose it down to get any mud off etc and let it dry fully. Then just spray the fabsil on until it's all soaked and leave it to dry. Fabsil is essentially silicon dissolved in a solvent, the silicon and solvent soaks into the fabric and the solvent evaporates leaving the silicon impregnated in the fabric. Once its dry it'll bead off like water off a ducks back
Canalcarper71 Canalcarper71
Posts: 1,389
#4 11 Sep 2024 09:05
0
In reply to Post #1
I done my tempest when I was fishing in the warmer months,used an old plastic tub a paint brush and fabsil gold and while rods were out I waterproofed it,got some funny looks and comments but let it dry in the sun after and I found a hole in mine so put a puncture outfit over it and then the skull cap went over it and it's as good as new.
I've got and slx 2 man that needs doing but only use that when it goes colder
devon157
Posts: 1,144
#5 11 Sep 2024 09:56
0
Cheers for the reply guys,the jacket I have is a Mil-Tec Wet Weather Trilaminate Jacket,I might just take a risk with the fabsil on the jacket as I can't afford both at the moment
jhhilton1983 jhhilton1983
Posts: 1,941
#6 11 Sep 2024 10:37
0
In reply to Post #5
I used fabsil on a gortex jacket over the summer and it worked fine. Also worked on my dogs CA coat

I have used on a bivvy in the past and was good - i would most likely just buy the spray cans now for ease of use.

Hardest part if getting a warm dry day at the moment
The_Andyman The_Andyman
Posts: 11,321
#7 11 Sep 2024 11:42
0
In reply to Post #6
I used the fabsil gold spray cans on my older chub bivvy, worked great
vossy1 vossy1
MODERATOR
Posts: 9,011
#8 11 Sep 2024 18:25
0
In reply to Post #5
Goretex and the like are a permeable membrane which allows it to breath, while Fabsil will probably waterproof it, it will also probably block it with the silicone and stop it from breathing (if that's important to you).

I'm sure Gerry has posted in depth on the subject from memory. I think nikwax do a product specifically for Goretex types.
Are you sure?

This action cannot be undone.

Yes, continue

Loading…