In reply to Post #9
No mate can't remember where I bought mine but they were new from a tackle shop
No mate can't remember where I bought mine but they were new from a tackle shop
In reply to Post #10
Yeas I know I took it apart and as you say re circuit is totally encased in resin but after a night of rain one alarm did not work properly, once it eventually dried out it worked properly again
Yeas I know I took it apart and as you say re circuit is totally encased in resin but after a night of rain one alarm did not work properly, once it eventually dried out it worked properly again
In reply to Post #17
With the circuit encased in resin it does not guarantee it's waterproof unless all in one PCB in a sealed IP rated case.
It's likely their are flying leads off the PCB to the battery pack and the various sensor inputs which are routes for water ingress.
With the circuit encased in resin it does not guarantee it's waterproof unless all in one PCB in a sealed IP rated case.
It's likely their are flying leads off the PCB to the battery pack and the various sensor inputs which are routes for water ingress.
In reply to Post #17
Unfortunately the encapsulation (obviously) wasn't always perfect, but in most cases it was.
Unfortunately the encapsulation (obviously) wasn't always perfect, but in most cases it was.
Does anyone have any idea what size or how you would describe the internal locking nut for alignment on the buzz bars as I have one missing!!...... 
In reply to Post #20
You just did it
Lock nut lol
Or bush
You just did it
Lock nut lol
Or bush
In reply to Post #21
I googled bush and ended up on pornhub then Xhamster........
I googled bush and ended up on pornhub then Xhamster........
In reply to Post #22
Try compression bushing
This came up on Google first
If you not bothered about nylon rubber etc
A 10mm bore should just clear the 3/8 bolt
https://www.verpas.co.uk/g-nylon-bushes-washers-and-spacers/spacers-and-washers-pa-or-pe/
Try compression bushing
This came up on Google first
If you not bothered about nylon rubber etc
A 10mm bore should just clear the 3/8 bolt
https://www.verpas.co.uk/g-nylon-bushes-washers-and-spacers/spacers-and-washers-pa-or-pe/
In reply to Post #23
Cheers Mark......but not what I'm looking for.......
Cheers Mark......but not what I'm looking for.......
In reply to Post #24
Have you opened it up Wayne? I cannot remember now if the bolt was standard type head or a T-bolt head sat in the moulded housing, either way you want a 3/8 BSF threaded bolt with the right type of bolt head.
T Head Bolt
Finding one in 3/8 BSF is the difficult bit
Have you opened it up Wayne? I cannot remember now if the bolt was standard type head or a T-bolt head sat in the moulded housing, either way you want a 3/8 BSF threaded bolt with the right type of bolt head.
T Head Bolt
Finding one in 3/8 BSF is the difficult bit
In reply to Post #25
Hi, no I haven't and have just used a rubber O Ring to get it lined up nicely. It's fine so will leave it as it is......cheers though.....
Hi, no I haven't and have just used a rubber O Ring to get it lined up nicely. It's fine so will leave it as it is......cheers though.....
In reply to Post #26
Sorry Wayne your talking about the black plastic collar aligner just read your post properly
I might have one still at home as I took them off mine I'll have a look tonight.
Sorry Wayne your talking about the black plastic collar aligner just read your post properly
I might have one still at home as I took them off mine I'll have a look tonight.
In reply to Post #27
Hi Ian, mine have the stainless collars but if you find the nut please let me know......
Cheers Bob, they look spot on.....
Hi Ian, mine have the stainless collars but if you find the nut please let me know......
Cheers Bob, they look spot on.....
In reply to Post #29
You may well have later versions of the i3 alarms then as I bought mine from Max literally a couple of weeks after the initial launch, they had plastic collars with a rubber compression pad or someone has sourced some and added them aftermarket.
There is this type of thing available
ALARM LOCKING NUT
Or These
NEW DIRECTION
You may well have later versions of the i3 alarms then as I bought mine from Max literally a couple of weeks after the initial launch, they had plastic collars with a rubber compression pad or someone has sourced some and added them aftermarket.
There is this type of thing available
ALARM LOCKING NUT
Or These
NEW DIRECTION