Simmo1961
Last active 351 days ago
Profile picture
Activity
- Posts
- 20
- Registered
- 31 Mar 2021 11:54
- Last posted
- 30 Jul 2024 19:53
Contact details
- Name
- D*** S********
- Location
- East Yorkshire
Last posts from this user
Forum / Thread
Post
Date/Time
Forum: Tackle
Thread: Seeking Spodding Advice.
30 Jul 2024
@ 7:53pm
@ 7:53pm
I ended up going for a Sonik Herox spod reel which comes loaded with 200m of Hypa-Viz 30lb braid. I'll definitely get myself a finger stall but in the meantime I'll use a glove. I can well imagine that braid will be the same as a cheese wire across the end of a finger when something goes wrong.
Forum: Tackle
Thread: Seeking Spodding Advice.
29 Jul 2024
@ 1:12pm
@ 1:12pm
I'm currently looking to start Spodding as I've never done it before. I'm using a pair of Sonik Xtractor 9ft/3lb tc rods and have just ordered the Sonik Xtractor 9ft/4.5lb tc spod rod to compliment this setup. My pair of reels are the Okuma LS 6K and I'm thinking of getting an Okuma spod reel too. Once I've decided on the reel, should I be looking to load it with mono and a mono shock leader or just braid? The lake I fish is only a 50m chuck max and so I won't be launching the spod very far. My thoughts were to load the reel with the same 15lb mono mainline (plus a suitable mono shock leader) which I have on the other 2 rods so that the stretch will be about the same whether I'm fishing, or spodding, and I won't need to mess about trying to allow for the stretch of the mono which I would need to do if I used braid for the spod rod.
Any pointers would be very much appreciated.
Any pointers would be very much appreciated.
Forum: Rigs
Thread: Line Twist When Reeling In.
21 Jul 2024
@ 5:23pm
@ 5:23pm
In reply to Post #6
Thanks for that @Tinhead. I've just watched it and if I can't rescue the line I have on now, I'll redo them as per the video. I still have plenty on the bulk spool so should be ok.
Thanks for that @Tinhead. I've just watched it and if I can't rescue the line I have on now, I'll redo them as per the video. I still have plenty on the bulk spool so should be ok.
Forum: Rigs
Thread: Line Twist When Reeling In.
21 Jul 2024
@ 5:21pm
@ 5:21pm
In reply to Post #5
Not particularly no. That said, I'm more used to 6lb Maxima etc and so am not sure what an overfilled Carp spool would be like. It's probably 2mm or so down from the lip of the spool on both of my reels.
Not particularly no. That said, I'm more used to 6lb Maxima etc and so am not sure what an overfilled Carp spool would be like. It's probably 2mm or so down from the lip of the spool on both of my reels.
Forum: Rigs
Thread: Line Twist When Reeling In.
21 Jul 2024
@ 3:24pm
@ 3:24pm
In reply to Post #2
I have noticed that if I'm not careful after casting, that the line springs from the spool in coils if I don't close the bail arm quickly enough. If I remember correctly, I spooled the line by standing the bulk spool on its end and with the label upwards and allowing the line to peel off over the lip of the bulk spool under tension between my finger and thumb. I read so many different opinions on spooling line this way, and other ways, that I never know if this is the correct way or not? I'm using the Gardner XT-HD mono at the moment.
I have noticed that if I'm not careful after casting, that the line springs from the spool in coils if I don't close the bail arm quickly enough. If I remember correctly, I spooled the line by standing the bulk spool on its end and with the label upwards and allowing the line to peel off over the lip of the bulk spool under tension between my finger and thumb. I read so many different opinions on spooling line this way, and other ways, that I never know if this is the correct way or not? I'm using the Gardner XT-HD mono at the moment.
Forum: Rigs
Thread: Line Twist When Reeling In.
20 Jul 2024
@ 11:38pm
@ 11:38pm
I noticed today that my line is twisting quite badly after reeling in. When I let the line drop slack with the lead in my hand, it's twisting all over the place. I'm pretty sure that my rig is causing the problem. I'm fishing a running rig using a 2oz Fox Edges flat pear style lead which is clipped to a run ring. I use a Fox run ring which sits on a Korda run ring rubber. When casting, I pull the run rig snugly over the run ring rubber to create the bolt effect for the bite but still allowing the carp to shake the lead to be free running after the hook sets. I think that the lead is corkscrewing through the water as I'm reeling it back in and as a result, due to there being no active swivel between the rig and the reel, the line is twisting. The swivel on the lead obviously allows the lead itself to swivel but doesn't stop the rotating run rig rubber from twisting the line. Does anyone have this issue? Am I reeling in too quickly maybe? Do I need to try a different setup? Different shaped lead maybe?
Forum: Tackle
Thread: 9ft Carp Rods.
22 Jun 2024
@ 9:17pm
@ 9:17pm
The lake where I'm currently fishing has a generous amount of overhanging willows. The owner of the lake is liking the ‘natural look' which is fine of course, but even kneeling down to cast, I'm still struggling with my 12ft rods. Does anyone have any recommendations please for a couple of 9ft rods. The longest cast needed is only 50m or so and the fish aren't particularly big, the best caught by anyone being maybe 24lb or so up to now. I'm fairly new to Carp fishing and so I wanted to make sure I get something suitable regarding the test curve. Mine are 3lb TC but are too much really for what I'm using them for.
Thanks.
Thanks.
Forum: Tackle
Thread: Rod Butt Damaged.
22 Aug 2023
@ 8:42pm
@ 8:42pm
In reply to Post #4
Cheers Baitman,
I might slit the loose cork with a razor blade so that I can lift it and get some glue under there and then I can just fill the small area after once the rest is stuck down properly.
Cheers Baitman,
I might slit the loose cork with a razor blade so that I can lift it and get some glue under there and then I can just fill the small area after once the rest is stuck down properly.
Forum: Tackle
Thread: Rod Butt Damaged.
22 Aug 2023
@ 7:16pm
@ 7:16pm
In reply to Post #2
Aye, that would fill the missing area fine but there's probably about a 3” section of loose cork which is also lifted from the blank. If I press it, I can feel that it's come away from the rod. If I were to remove the loose stuff too I would be left with quite a large area really. I wondered about trying to get some glue under the loose cork (syringe or something) and then I could just fill the small spot where the cork is missing. If I leave the loose cork alone, it's so thin, maybe 2mm max, that it would only be a matter of time before it also came off. That's why I wondered about going along the shrink tube route.
Aye, that would fill the missing area fine but there's probably about a 3” section of loose cork which is also lifted from the blank. If I press it, I can feel that it's come away from the rod. If I were to remove the loose stuff too I would be left with quite a large area really. I wondered about trying to get some glue under the loose cork (syringe or something) and then I could just fill the small spot where the cork is missing. If I leave the loose cork alone, it's so thin, maybe 2mm max, that it would only be a matter of time before it also came off. That's why I wondered about going along the shrink tube route.
Forum: Tackle
Thread: Rod Butt Damaged.
22 Aug 2023
@ 4:08pm
@ 4:08pm
I recently bought a pair of used Greys Platinum Prowlers, one of which has some of the cork missing from the butt. Probably a finger nail sized area but I can feel that there's a fair bit more which is loose around the same area. (Seller was good enough to send me pics of the damage prior to me buying them but for the asking price they were still worth it.) My thoughts are that the easiest way to sort it myself would be to fill the missing area with some suitable filler and then shrink tube both rod butts so that they match.
Does anyone have any recommendations regarding decent non-slip shrink tube please?
Does anyone have any recommendations regarding decent non-slip shrink tube please?