Are the nash barrows as well made as the carp porters? I had a metro barrow years ago and it was spot on. Looking at the bigger evo mk2 at the min or a carp porter fatboy or 4s but cant make my mind up. Theres no stock anywhere of fatboys or 4s but i can get a nash trax evo for £237 online.
Not as well but a lot better 
In reply to Post #1
Plenty of info around stating the Prestige quality is pants these days.
Plenty of info around stating the Prestige quality is pants these days.
In reply to Post #1
Yep I've got the power metro barrow and the quality of it is good
Yep I've got the power metro barrow and the quality of it is good
In reply to Post #4
Just watched a video on you youtube of the power carp porter and nash power barrow side by side and the bloke was saying the build quality of the nash was crap in comparison. Going off his video the nash one did look poorly made.
Just watched a video on you youtube of the power carp porter and nash power barrow side by side and the bloke was saying the build quality of the nash was crap in comparison. Going off his video the nash one did look poorly made.
In reply to Post #5
I saw that too,
It seemed rather biased and orchestrated.
to be honest you need to try these various barrows and power conversions for yourself, only then will you be able to make an educated choice.
there's another video showing a fully loaded power barrow going up a massive hill, having seen some of these barrows for myself I doubt that kind of performance is not rigged and edited.
I saw that too,
It seemed rather biased and orchestrated.
to be honest you need to try these various barrows and power conversions for yourself, only then will you be able to make an educated choice.
there's another video showing a fully loaded power barrow going up a massive hill, having seen some of these barrows for myself I doubt that kind of performance is not rigged and edited.
Best thing you can do imo buy the old model Carp porter or old Nash Traxx models and a Diy power kit if you want it powered.
I have a Carp porter of the latest model, put the Brand name NGT on it and it's correct, luckily I hadn't sold my old Nash Trax All-Terrain Evo yet.
I have a Carp porter of the latest model, put the Brand name NGT on it and it's correct, luckily I hadn't sold my old Nash Trax All-Terrain Evo yet.
In reply to Post #5
Well I've had had few different model carp porters in the past yes their good barrows but the Nash metro power barrow are just as good and it ain't poor quality had mine over 18 months and it's been great
Well I've had had few different model carp porters in the past yes their good barrows but the Nash metro power barrow are just as good and it ain't poor quality had mine over 18 months and it's been great
I've got a secondhand Power porter MK6, must admit I'm not impressed with the material quality. All the clamp points needed reinforceing when I got it.
A couple of years ago one of the lads was wheeling his powered barrow to his swim. Passing me he stopped for a chat, after a couple of minutes his barrow just took off on it's own, luckily he caught it before it it went in the lake or the adjacent beck. I'm pretty sure that was a Nash.
A couple of years ago one of the lads was wheeling his powered barrow to his swim. Passing me he stopped for a chat, after a couple of minutes his barrow just took off on it's own, luckily he caught it before it it went in the lake or the adjacent beck. I'm pretty sure that was a Nash.
In reply to Post #1
I don't know about the latest nash barrow but i still have a nash evo mk1 which is over 10 years old now and have had m2 and mk4 carp porters the nash one i have is better made than the carp porters i have had
I don't know about the latest nash barrow but i still have a nash evo mk1 which is over 10 years old now and have had m2 and mk4 carp porters the nash one i have is better made than the carp porters i have had
In reply to Post #6
I have converted my nash barrow with the global angling kit 350w mine does go up steep hills fully loaded i believe the standard nash power barrow is around 150w could be wrong?
I have converted my nash barrow with the global angling kit 350w mine does go up steep hills fully loaded i believe the standard nash power barrow is around 150w could be wrong?
Seems like all the new stuff is crap these days.
In reply to Post #5
So you were able to conclude the build quality of the Nash product off a video that is well known to be a load of ********? 🤣🤣
Tell you what , if the Prestige way of making a power barrow was so good all the barrow conversion companies would be doing the same thing but they aren't, they copy the Nash version, should tell you all you need to know.
So you were able to conclude the build quality of the Nash product off a video that is well known to be a load of ********? 🤣🤣
Tell you what , if the Prestige way of making a power barrow was so good all the barrow conversion companies would be doing the same thing but they aren't, they copy the Nash version, should tell you all you need to know.
In reply to Post #13
Yes you are correct you could tell the quality wasnt as good on the video. Maybe it was a friday afternoon jobbie.
Yes you are correct you could tell the quality wasnt as good on the video. Maybe it was a friday afternoon jobbie.
In reply to Post #14
Or maybe one was assembled loosely to form a bias, judging by many of the comments by viewers the general opinion is it was an unfair comparison, and staged with the sole intention of discrediting nash, the video maker has done nothing since, or anything previously.
IMO he came across as a bit of a dick.
Or maybe one was assembled loosely to form a bias, judging by many of the comments by viewers the general opinion is it was an unfair comparison, and staged with the sole intention of discrediting nash, the video maker has done nothing since, or anything previously.
IMO he came across as a bit of a dick.
In reply to Post #15
Correct, poor old Stuart just can't see whats going on infront of his own eyes.
Correct, poor old Stuart just can't see whats going on infront of his own eyes.
In reply to Post #16
One thing i do know is that every nash product that poor old stuart have ever owned other than my trax metro barrow has fell to bits, so maybe it was poorly made, no one will ever know. Mr nash hasnt got a very good track record when it comes to knocking out quality products.
One thing i do know is that every nash product that poor old stuart have ever owned other than my trax metro barrow has fell to bits, so maybe it was poorly made, no one will ever know. Mr nash hasnt got a very good track record when it comes to knocking out quality products.
In reply to Post #1
I bought my first Nash barrow in 2010 and it's still in use despite living outside for the last five years. I also bought two Metro's and one of the bigger model Nash barrows (Evo?) about four years ago for my members to use. These also live outside, but are still in great useable condition (obviously a bit of rust here and there).
I bought my first Nash barrow in 2010 and it's still in use despite living outside for the last five years. I also bought two Metro's and one of the bigger model Nash barrows (Evo?) about four years ago for my members to use. These also live outside, but are still in great useable condition (obviously a bit of rust here and there).
I bought one of the very first carp porters, may have even been a prototype, grey hammerite before they were green, and you had to remove everything to break it down, [nothing folded], It's built like a tank, much heavier gauge steel than the current china imported ones, I never had a puncture in the original pneumatic tyre, even that seems better quality than the more recent versions which seem to get punctures more frequently.
I even used it to move a chevy V8 engine [not a light thing ] and it never bent or buckled one bit.
Its about 30 years old, well used, but well looked after.
I'v never had a Nash barrow, however I have a Nash bedchair, again quite old and well used, but still fully functional, nothing has broken on it yet, I have the chair too, again no problems at all,
I have a Nash "cube" bag that'works as it did the day I purchased it.
it's donkeys years old, and all zips buckles, stitching are intact, and it's in weekly use.
It seems to me that much of the failures of tackle ,whether it be Nash or any other brand, come about when the country of origin is moved out of uk to increase profits, whereas the original was a higher spec and quality.
Nash himself stated he could no longer manufacture Titans in the uk as nobody could, or would make them.
it took years to find a suitable manufacturer, and even then many would say they aren't as good as the original uk made ones.
as soon as a "niche" is found for a carp oriented item there's a race to the bottom to see who can produce it the cheapest with the highest profits.
quality becomes secondary, as they'll be "punting" the latest model next season,, and many will just have to have the "latest" on the bankside fashion show.
to give an idea of how tackle once was, my grandfather bought me my first "real" fishing rod from a shop in Horning, Norfolk, while on holiday on the broads, a solid fibreglass two piece spinning rod, I caught a nice perch the first day I had it,
last year I caught a double figure pike on that same rod, it was bought in 1959
I even used it to move a chevy V8 engine [not a light thing ] and it never bent or buckled one bit.
Its about 30 years old, well used, but well looked after.
I'v never had a Nash barrow, however I have a Nash bedchair, again quite old and well used, but still fully functional, nothing has broken on it yet, I have the chair too, again no problems at all,
I have a Nash "cube" bag that'works as it did the day I purchased it.
it's donkeys years old, and all zips buckles, stitching are intact, and it's in weekly use.
It seems to me that much of the failures of tackle ,whether it be Nash or any other brand, come about when the country of origin is moved out of uk to increase profits, whereas the original was a higher spec and quality.
Nash himself stated he could no longer manufacture Titans in the uk as nobody could, or would make them.
it took years to find a suitable manufacturer, and even then many would say they aren't as good as the original uk made ones.
as soon as a "niche" is found for a carp oriented item there's a race to the bottom to see who can produce it the cheapest with the highest profits.
quality becomes secondary, as they'll be "punting" the latest model next season,, and many will just have to have the "latest" on the bankside fashion show.
to give an idea of how tackle once was, my grandfather bought me my first "real" fishing rod from a shop in Horning, Norfolk, while on holiday on the broads, a solid fibreglass two piece spinning rod, I caught a nice perch the first day I had it,
last year I caught a double figure pike on that same rod, it was bought in 1959
In reply to Post #19
The quality of the powerporter i have just bought is absolutely spot on,It feels very well built.I can't see korda selling these with quality issues,I know people knock Korda but I have never had any issue with any of their gear.The guy I spoke to at Prestige was very helpful and sorted out the two porters I ordered during black friday sale really quickly,it's a shame the same can't be said about Nash customer services
The quality of the powerporter i have just bought is absolutely spot on,It feels very well built.I can't see korda selling these with quality issues,I know people knock Korda but I have never had any issue with any of their gear.The guy I spoke to at Prestige was very helpful and sorted out the two porters I ordered during black friday sale really quickly,it's a shame the same can't be said about Nash customer services
In reply to Post #20
It was hoped Korda purchasing them would improve things, it seems they have, if quality has improved, and service from them when I ordered a few barrow parts was fast and efficient.
It was hoped Korda purchasing them would improve things, it seems they have, if quality has improved, and service from them when I ordered a few barrow parts was fast and efficient.
In reply to Post #19
The early carp porters had 50% thicker walls than my MK6 power porter.
The early carp porters had 50% thicker walls than my MK6 power porter.
In reply to Post #19
I'd take the things Mr Nash says with a pinch of salt. If people think that the Chinese/Taiwanese/Singaporean/Korean factories can make iPhones, iPads etc in their millions but can't sew a bit of fabric round a pole like some Dorris in Essex they are in the dark ages.
The likes of Nash went over to China and gave contracts to the lowest bidder for maximum profit and the cheap contractors were cr*p. Nobody to blame there but the greedy owners.
There is an interesting documentary on Netflix called American Factory. American made was at one point a sign of quality, the Chinese now laugh at their ability.
The ethics of using Chinese factories is another matter.
I'd take the things Mr Nash says with a pinch of salt. If people think that the Chinese/Taiwanese/Singaporean/Korean factories can make iPhones, iPads etc in their millions but can't sew a bit of fabric round a pole like some Dorris in Essex they are in the dark ages.
The likes of Nash went over to China and gave contracts to the lowest bidder for maximum profit and the cheap contractors were cr*p. Nobody to blame there but the greedy owners.
There is an interesting documentary on Netflix called American Factory. American made was at one point a sign of quality, the Chinese now laugh at their ability.
The ethics of using Chinese factories is another matter.
In reply to Post #23
Things can be built to a high quality, or a cheap price, you can choose either, but rarely obtain both.
Things can be built to a high quality, or a cheap price, you can choose either, but rarely obtain both.
Reading ALL pages