I've got a set of 3.25lb tcs century NCS rods in VGC but thinking of a full rebuild on the blanks.. Any recommendations and costs experienced.. Blanks will last a lifetime, just wanted a black look.
I know there are loads of options but looking for rough ideas.. Alps real seats, full shrink, black whippings and 50mm ringing..
You get the idea
I know there are loads of options but looking for rough ideas.. Alps real seats, full shrink, black whippings and 50mm ringing..
You get the idea
In reply to Post #1
I had some 30 year old Century Armalite's rebuilt by Kevin Baines of Anglers Workshop in Stoke. He's also they guy who built them originally for me in 1987. Think he charged me £120 per rod.
Kevin really knows his stuff on rods as he's been building them that long. He has some interesting views on rod building and balance of the rod, he tends to build rods with relatively shave a mall guides. My Armalite's have a 25mm butt ring, half the size of the current "fashionable" 50mm ones.
Give him a call, you'll get his number off tinternet. You'll need too give him some time to do them, think he had my rods about 4 months. OK if you have some spares to rely on, or if you pack up over winter!!
Rgds
F
I had some 30 year old Century Armalite's rebuilt by Kevin Baines of Anglers Workshop in Stoke. He's also they guy who built them originally for me in 1987. Think he charged me £120 per rod.
Kevin really knows his stuff on rods as he's been building them that long. He has some interesting views on rod building and balance of the rod, he tends to build rods with relatively shave a mall guides. My Armalite's have a 25mm butt ring, half the size of the current "fashionable" 50mm ones.
Give him a call, you'll get his number off tinternet. You'll need too give him some time to do them, think he had my rods about 4 months. OK if you have some spares to rely on, or if you pack up over winter!!
Rgds
F
In reply to Post #1
I had some 30 year old Century Armalite's rebuilt by Kevin Baines of Anglers Workshop in Stoke. He's also they guy who built them originally for me in 1987. Think he charged me £120 per rod.
Kevin really knows his stuff on rods as he's been building them that long. He has some interesting views on rod building and balance of the rod, he tends to build rods with relatively shave a mall guides. My Armalite's have a 25mm butt ring, half the size of the current "fashionable" 50mm ones.
Give him a call, you'll get his number off tinternet. You'll need too give him some time to do them, think he had my rods about 4 months. OK if you have some spares to rely on, or if you pack up over winter!!
Rgds
F
I had some 30 year old Century Armalite's rebuilt by Kevin Baines of Anglers Workshop in Stoke. He's also they guy who built them originally for me in 1987. Think he charged me £120 per rod.
Kevin really knows his stuff on rods as he's been building them that long. He has some interesting views on rod building and balance of the rod, he tends to build rods with relatively shave a mall guides. My Armalite's have a 25mm butt ring, half the size of the current "fashionable" 50mm ones.
Give him a call, you'll get his number off tinternet. You'll need too give him some time to do them, think he had my rods about 4 months. OK if you have some spares to rely on, or if you pack up over winter!!
Rgds
F
In reply to Post #3
Cheers pal
Cheers pal
In reply to Post #1
Colin Leatherbarrow at www.custombuiltfishingrods.co.uk re rung my 20+ year old Ballistas, cost me £70 per rod iirc, he's in Urmston Manchester
Colin Leatherbarrow at www.custombuiltfishingrods.co.uk re rung my 20+ year old Ballistas, cost me £70 per rod iirc, he's in Urmston Manchester
In reply to Post #5
Cheers pal, sent them a message
Cheers pal, sent them a message
In reply to Post #6
Stripping and replacing the rings will cost about £100 per rod. Handle removal and replacement will add to that.
Stripping and replacing the rings will cost about £100 per rod. Handle removal and replacement will add to that.
Think Cotswold Rods charged me a bit over £100 per rod for my old armalites. Full cork, SIC rings, varnish, and a trim down of top section to tighten up the spigots.
In reply to Post #8
Did they refinish the full blank?
Did they refinish the full blank?
In reply to Post #9
I had a set of Ng's refurbed last year by Cains Custom Rods in Norfolk.
Absolutely superb job
I had a set of Ng's refurbed last year by Cains Custom Rods in Norfolk.
Absolutely superb job
In reply to Post #10
Dd they refinish the full blank?
Dd they refinish the full blank?
In reply to Post #11
Yep they did. They left the original Vig Gibson writing on which was a nice touch
Yep they did. They left the original Vig Gibson writing on which was a nice touch
In reply to Post #11
Yes he did
Yes he did
In reply to Post #3
Ask kev to put 50ml on your rods and he will do what i do tell you to **** off ! Armalites are a pain to refurb due to the strands in the carbon , i refurbed a pair never again , not many rod builders will refurb these days
I wont its not worth it i could build a new rod in half the time , you dont know what you will find on a rod someone else has built , kev defo one of the best for refurbs.
Ask kev to put 50ml on your rods and he will do what i do tell you to **** off ! Armalites are a pain to refurb due to the strands in the carbon , i refurbed a pair never again , not many rod builders will refurb these days
I wont its not worth it i could build a new rod in half the time , you dont know what you will find on a rod someone else has built , kev defo one of the best for refurbs.
In reply to Post #14
50mm as standard
50mm as standard
In reply to Post #14
I doubt he'd put an alps seat on either
I doubt he'd put an alps seat on either
In reply to Post #16
No neither would i
No neither would i
In reply to Post #16
That 'look' he gives when people ask for 50s and / or alps is forever etched in my memories...
.....followed by the 4 hour physics lesson!! 🙈🙈😎😎
If you have met hem you would know..
Absolute top guy and is retiring this year...
That 'look' he gives when people ask for 50s and / or alps is forever etched in my memories...
.....followed by the 4 hour physics lesson!! 🙈🙈😎😎
If you have met hem you would know..
Absolute top guy and is retiring this year...
In reply to Post #17
🤣🤣👍👍
🤣🤣👍👍
In reply to Post #18
Retiring.. better pull my finger (and wallet) out
Retiring.. better pull my finger (and wallet) out
In reply to Post #14
I agree, Kevin defo one of the best rod builders out there. I also bought 3 x Mk2 Armalites off ebay for my lad, which he rebuilt. They've got a 30mm butt ring though!!!!
Cheers
F
I agree, Kevin defo one of the best rod builders out there. I also bought 3 x Mk2 Armalites off ebay for my lad, which he rebuilt. They've got a 30mm butt ring though!!!!
Cheers
F
In reply to Post #16
Probably agree to be fair about alps, was just voicing ideas.. Still 50mm as standard
Probably agree to be fair about alps, was just voicing ideas.. Still 50mm as standard
In reply to Post #22
Why??
Why??
In reply to Post #23
Don't know fella, they came as 50mm standard so a standard rebuild.
Prefer look to be fair and that's why their is such a choice, we all have a different eye..
Don't know fella, they came as 50mm standard so a standard rebuild.
Prefer look to be fair and that's why their is such a choice, we all have a different eye..
In reply to Post #24
If you prefer the look that's sound...👍
If you prefer the look that's sound...👍
In reply to Post #21
Id have 30s on them too.
Id have 30s on them too.
Reading ALL pages