Hi, can anyone point me into the right direction, my son bought me of the latest Neville alarms which he had converted by Kudos, they came with lovely green wheels(two sets) the ones that are fitted have the two magnet wheels and I want to swop them to the four magnet ones but as I am getting older my eye sight is not as good as they where and the pin that holds the wheel in are so thin I cannot tell if they are flat screwdriver or phillips possi or if you just knock the pin out, any help would bo appreciated thanks

In reply to Post #1
I don't know the answer but......

If you have a mobile phone with a camera, get a close up photo and then zoom in on the picture on your phone, should be good enough to see if flat or cross head etc.

In reply to Post #1
I thought they were just a pin

In reply to Post #1
Usually just a pin with a slight flattened or squashed end so that it bites in and doesn't fall out. Examine both sides with a magnifying glass if needs be and push pin out from the cleaner, rounder looking end.

In reply to Post #4
Thanks everyone for your help, I phoned a friend who works in the saddlery trade and he gave me a strong needle so I just tapped the pins out, easy when you know how, thanks again