In reply to Post #15
I was about to start a new subject about increasing hook eye angle with pliers
Could it create a weak spot on the hook ? 🤔
I was about to start a new subject about increasing hook eye angle with pliers
Could it create a weak spot on the hook ? 🤔
Gardner mugga for me, i use the rig you describe for almost all my fishing and it work well with the mugga, i haven't lose a carp for years with it due hookpull
In reply to Post #16
It could but highly doubtful.
Is there a need to though nowadays with all the different manufacturers and patterns?
you could probably find one that is what you need.
It could but highly doubtful.
Is there a need to though nowadays with all the different manufacturers and patterns?
you could probably find one that is what you need.
In reply to Post #16
Yes it will, there are so many patterns of hook out these days there really is no need to risk doing it
Yes it will, there are so many patterns of hook out these days there really is no need to risk doing it
Imo a long shank hook with inturned eye...
Something like the esp trig hammer would be perfect 👌
Something like the esp trig hammer would be perfect 👌
I've been using the korda kranks just like this with no problems. Size 4 barbless
Mugga in a size 4, never had one fail and doesn’t need a kicker or tubing to be super effective and aggressive.
krank size 8 or 6, whip two turns down go under the hair another 3 or 4 turns ..jobs a good un
Mugga's are really good here, I've also done really well with the trighammers - never both with shrink tube with those on a german or coated braid based rig.
In reply to Post #24
KD rig design, can't be better with only hook and braid
My favorite rig this season on the river ! Always pin them down
KD rig design, can't be better with only hook and braid
My favorite rig this season on the river ! Always pin them down
Personally, I think hook pattern doesn't have any bearing on what happens when using supple braid unless the braid itself is being tightened to the lead upon the fish moving away. If you're using stuff like crumb over a bed of bait, you're relying on that fish to move off and tighten the braid up, otherwise a motionless fish sucking and blowing on one spot will likely just blow it straight out. You're just praying the hook lands in a lip instead of blowing the hook out of the 15inch diameter mouth.
I try and use as stiff a braid or fluoro as possible in most situations. I often use short lengths of 20lb X Line with a wide gape over beds of maize, it hasn't done much harm. I don't like closing the gape too much as (in my eyes) it reduces the chance of a good hook hold far if the hook takes hold further back in the mouth.
I try and use as stiff a braid or fluoro as possible in most situations. I often use short lengths of 20lb X Line with a wide gape over beds of maize, it hasn't done much harm. I don't like closing the gape too much as (in my eyes) it reduces the chance of a good hook hold far if the hook takes hold further back in the mouth.
Easy... esp trig hammer without a doubt