They look a right faff on to use mind as just watched a video of one in use.
In reply to Post #9
Cheers, will take a look
Cheers, will take a look
In reply to Post #16
What a bushwhacker?
What a bushwhacker?
In reply to Post #1
I have the Nash one. I have it extendable to 46.5 metres but in truth it can be difficult to use depending on the conditions. I even modified one of my 2 spoons to fit a fishspy and a chirp+
It has its uses and it's great for finding litte holes in weed. Can be a PIA when bringing it in and picking grit up in the 1.5m sections.
I have the Nash one. I have it extendable to 46.5 metres but in truth it can be difficult to use depending on the conditions. I even modified one of my 2 spoons to fit a fishspy and a chirp+
It has its uses and it's great for finding litte holes in weed. Can be a PIA when bringing it in and picking grit up in the 1.5m sections.
In reply to Post #18
Yes
Yes
In reply to Post #1
I went a different route to most. I had an original Angling Intelligence 12m pole that in reality is very limited in use. 12m seems reasonable distance until you put it on the water! I bought the universal baiting pole extension kit from Tacklebox. It works a treat and it's actually 6.7m not 6m as stated. I have ended up with 3 of these extension kits plus some other extra sections that you can buy separately. In total I now have 20 1.6m pole lengths plus the 3 short sections (that all fits neatly in 2 of the extension kit bags,10 in each) in addition to my original 12m AI pole. In total that gives me 45m if required, but I could add more just like the bushwhacker. https://www.tacklebox.co.uk/baiting-up/tb-universal-baiting-pole-front-extension-kit.html
I think it has several advantages over the bushwhacker as it is carbon not fibreglass so is stiffer, lighter and thinner. There is also no faffing about with the push buttons on the joints as it is a simple overfit joint.
I did look at the bushwhacker, but wasn't overly convinced by it. My mate has one that he can use to over 50m! But...... it snakes a lot in the water and also when used at distance which can take some time it takes on water and starts to sink. The tackle box one snakes too, but not as much and because it is an overfit joint it doesn't take on any water.
I was always a bit worried the joints may come apart in use, but have never found that to be an issue. There are some disadvantages to the over fit joint in that it can be quite difficult getting them apart, probably as I'm a bit over zealous pushing them together. I ended up putting some short lengths of shrink tube near the end of each section to help as s twist grip to take them apart. Also you have to be sure to line the joints up so you push then in straight as there isn't much play in them like on the bushwhacker. I tend to have it set up in lengths of 3 or 4 sections so not many joints to deal with in actual use. Obviously that's only doable if the swim allows.
I rarely use my original AI pole and just use the tackle box kits, unless I need that extra 12m it just stays in my rod bag.
Sorry for the essay!!😆
I went a different route to most. I had an original Angling Intelligence 12m pole that in reality is very limited in use. 12m seems reasonable distance until you put it on the water! I bought the universal baiting pole extension kit from Tacklebox. It works a treat and it's actually 6.7m not 6m as stated. I have ended up with 3 of these extension kits plus some other extra sections that you can buy separately. In total I now have 20 1.6m pole lengths plus the 3 short sections (that all fits neatly in 2 of the extension kit bags,10 in each) in addition to my original 12m AI pole. In total that gives me 45m if required, but I could add more just like the bushwhacker. https://www.tacklebox.co.uk/baiting-up/tb-universal-baiting-pole-front-extension-kit.html
I think it has several advantages over the bushwhacker as it is carbon not fibreglass so is stiffer, lighter and thinner. There is also no faffing about with the push buttons on the joints as it is a simple overfit joint.
I did look at the bushwhacker, but wasn't overly convinced by it. My mate has one that he can use to over 50m! But...... it snakes a lot in the water and also when used at distance which can take some time it takes on water and starts to sink. The tackle box one snakes too, but not as much and because it is an overfit joint it doesn't take on any water.
I was always a bit worried the joints may come apart in use, but have never found that to be an issue. There are some disadvantages to the over fit joint in that it can be quite difficult getting them apart, probably as I'm a bit over zealous pushing them together. I ended up putting some short lengths of shrink tube near the end of each section to help as s twist grip to take them apart. Also you have to be sure to line the joints up so you push then in straight as there isn't much play in them like on the bushwhacker. I tend to have it set up in lengths of 3 or 4 sections so not many joints to deal with in actual use. Obviously that's only doable if the swim allows.
I rarely use my original AI pole and just use the tackle box kits, unless I need that extra 12m it just stays in my rod bag.
Sorry for the essay!!😆
In reply to Post #21
Thanks for the essay Simon, can't beat a nice detailed response. So, what I could do is buy the cheap Aqua 12m one as I do like the idea of a telescopic one, plus initially I only need it for close in work. And then when I need to go longer, buy the TB extension. And if I end up with a few of the TB extension kits like yourself, I can ditch the Aqua one. Just out of interest, what spoon do you use on the end, presumably the AI one?
Thanks for the essay Simon, can't beat a nice detailed response. So, what I could do is buy the cheap Aqua 12m one as I do like the idea of a telescopic one, plus initially I only need it for close in work. And then when I need to go longer, buy the TB extension. And if I end up with a few of the TB extension kits like yourself, I can ditch the Aqua one. Just out of interest, what spoon do you use on the end, presumably the AI one?
In reply to Post #22
Yeah exactly that. The aqua telescopic one looks good and if I were looking at that type of pole I think I'd look at a telescopic one rather than an over fit one like my AI one. I actually use a couple of different baiting spoons. A modified AI one with side floats I added and also one I made that rotates within a frame which is very stable. I made the rotating one probably 10-12 years ago. The bushwhacker spoon is the best bit of that system I reckon and the best spoon available. I had my spoons in use long before that came out though.
Yeah exactly that. The aqua telescopic one looks good and if I were looking at that type of pole I think I'd look at a telescopic one rather than an over fit one like my AI one. I actually use a couple of different baiting spoons. A modified AI one with side floats I added and also one I made that rotates within a frame which is very stable. I made the rotating one probably 10-12 years ago. The bushwhacker spoon is the best bit of that system I reckon and the best spoon available. I had my spoons in use long before that came out though.
In reply to Post #22
Now rather than making or modifying spoons I think I'd just get the Nash bushwhacker spoon and an adapter to fit onto a standard threaded pole end.
Now rather than making or modifying spoons I think I'd just get the Nash bushwhacker spoon and an adapter to fit onto a standard threaded pole end.
In reply to Post #24
Yeah, I agree, was thinking of getting the allthings3d spoon - basically the Nash spoon with a 3/8" thread. Keep the small companies going I say rather than give you hard earned to the big companies!!
Yeah, I agree, was thinking of getting the allthings3d spoon - basically the Nash spoon with a 3/8" thread. Keep the small companies going I say rather than give you hard earned to the big companies!!
delivery date jan 22 2023 for mine
In reply to Post #26
What's that, the allthings3d spoon?
What's that, the allthings3d spoon?