Spent lastnight sleeping or not much with a metal bar from my bedchair digging in to my ribs, I had a quick go at pulling it from the knot in the end and it doesn't seem there is much give tbh.
It's done in 3 sections head mills and bottom.
Do I need to undo it all and re thread it through the loops?
Looks a pita do do that but I won't be sleeping on it again till it's sorted
I seem to remember have read bad things about re doing it with paracord?
I have a bad back that can just go for no apparent reason so rather
It's done in 3 sections head mills and bottom.
Do I need to undo it all and re thread it through the loops?
Looks a pita do do that but I won't be sleeping on it again till it's sorted
I seem to remember have read bad things about re doing it with paracord?
I have a bad back that can just go for no apparent reason so rather
In reply to Post #1
Yep use paracord instead of elastic, makes a huge difference. You can buy it on ebay for a couple of quid
Yep use paracord instead of elastic, makes a huge difference. You can buy it on ebay for a couple of quid
In reply to Post #2
Strongly recommend this. It was a bit of faff to do but I've never slept so well!
Strongly recommend this. It was a bit of faff to do but I've never slept so well!
In reply to Post #1
Just done my Fox flatliner, flared about an inch of paracord and taped it to the elastic, then just pull it through, coupled with a SIM, its made a huge difference
Just done my Fox flatliner, flared about an inch of paracord and taped it to the elastic, then just pull it through, coupled with a SIM, its made a huge difference
I've just tightened up my trakker ELS which already has the parachord in the middle section. I turned it upside down so cover directly onto floor then I inserted cable ties every third loop and pulled tight.
This made it so much easier to tighten the parachord and the elastic which I did using pliers to get a firm grip. Hopefully it will feel like new next time I use it.
Also if you dont want to go down the parachord route, using cable ties on every loop along the mid and part of the head section will give you the same effect very quickly. Did that on my old bedchair and it worked a treat.
This made it so much easier to tighten the parachord and the elastic which I did using pliers to get a firm grip. Hopefully it will feel like new next time I use it.
Also if you dont want to go down the parachord route, using cable ties on every loop along the mid and part of the head section will give you the same effect very quickly. Did that on my old bedchair and it worked a treat.
What size Paracord are you guys using please. 6 8 10 mm?
In reply to Post #7
Cheers John ordered. Gonna do my levelite
Cheers John ordered. Gonna do my levelite
In reply to Post #8
You might struggle with 9mm on your levelite the holes in the steel part on the folding section are only 8mm, i bought 9mm for my levelite and it wouldn't fit so ordered 7mm which worked fine
You might struggle with 9mm on your levelite the holes in the steel part on the folding section are only 8mm, i bought 9mm for my levelite and it wouldn't fit so ordered 7mm which worked fine
In reply to Post #9
Bugger
For sale 9mm kettle handle cord. £10 per metre
Bugger
For sale 9mm kettle handle cord. £10 per metre
Paracord is a good option but dont pull it too tight or it'll be like sleeping on a snooker table.
Allow a bit of sag.
Allow a bit of sag.
In reply to Post #6
6mm
6mm
In reply to Post #10
£10 per metre.....wow.
£10 per metre.....wow.
In reply to Post #10
Contact the seller & see if they'll exchange it, they do 7mm as well
Contact the seller & see if they'll exchange it, they do 7mm as well
In reply to Post #14
I did mate thanks
I did mate thanks