Just brought one of these 2nd hand, not sure if I'm putting the rods in wrong, or what, does anyone have one and can tell/show me how the rods are supposed to go.
I've got the butt section in the velcro part and tried putting the tips in the little pockets, but they then stick out the end of the holdall.
Only way I can get them to fit is to put both parts of the rod in the velcro part. There 12ft shimano tx2 rods of that helps.

In reply to Post #1
Not sure what you are meaning,I just break my rod into the two sections.I put the tip section at the side of the butt section (tip by spigot)then put each rod in the 3 sections of the trisleeve

In reply to Post #1
The tri sleeve is quite a snug fit. With the reels facing towards you and the zips opened fully, push the two sections down into the base of the holdall and the rest of the rod should fit. I only use the middle velcro strap on each to secure the rods in place..

In reply to Post #3
Ok, I think I thought the tip sections, went in the little pockets either side of the dividing flaps.... Guess there for bank sticks or something not the rods.

In reply to Post #4
The rods go in the main section of the rod bag,three sections for three rods

In reply to Post #5
On the dividing flaps inside there are some little pockets towards the bottom of the holdall, what are these for.

In reply to Post #6
If you look on you tube there is a video for the fox explorer sleeves,it is the same design as the camolite.I have the 10ft and 13ft and really rate them