Does anyone have the same issues as I do with the delkim nitelight hanger plug getting stuck when taking it out of the d lok system ? If so has anyone figured out a genius way to avoid it .
I think I'm reading this right, you're actually meant to pull the plug out using the cable rather that pulling the plug.
In reply to Post #2
thays exactly what delkim advise,pull the cable as its protected,that way the plug straight out the socket everytime
thays exactly what delkim advise,pull the cable as its protected,that way the plug straight out the socket everytime
In reply to Post #3
Surely that will snap the cable as the diameter of the wires inside are tiny ?
Surely that will snap the cable as the diameter of the wires inside are tiny ?
Have had issues where the connector has separated when removing leaving the pin still in the Delkim. Luckily screws back together allowing it to be removed. Going to end up supergluing the threads to stop it happening.
In reply to Post #4
the external of the wires is armoured
the external of the wires is armoured
In reply to Post #4
Delkim have a strong wire (not electrical) running through the inside of the armoured outer jacket between the jack and indicator so just pull the indicator. Don't use the armoured Sheath to remove it,
pull the indicator head.
Delkim have a strong wire (not electrical) running through the inside of the armoured outer jacket between the jack and indicator so just pull the indicator. Don't use the armoured Sheath to remove it,
pull the indicator head.
In reply to Post #7
Works a treat that thanks , must admit I did have to close my eyes the first time though . 👍
Works a treat that thanks , must admit I did have to close my eyes the first time though . 👍
All you got to do is hold the actually black plug and pull mate it's stiff but comes out easy enough
In reply to Post #9
Delkim specifically tell you NOT to do that.
Delkim specifically tell you NOT to do that.