I have a fox carbon throwing stuck, the straight one with the red/orange colour to the carbon.
The resin near to the tip is cracking very slightly so i want to repair it before it gets worse. I can get pictures if that would help. Wondering if there is anyone who knows how to make this sort if repair and has any advice please.
The resin near to the tip is cracking very slightly so i want to repair it before it gets worse. I can get pictures if that would help. Wondering if there is anyone who knows how to make this sort if repair and has any advice please.
https://youtu.be/DHWsTg9mkTg
In reply to Post #1
You can apply a sheet of polyester on the exterior by using a mo tip polyester repair kit.
This will reenforce the throwing stick and avoid further cracking
You can apply a sheet of polyester on the exterior by using a mo tip polyester repair kit.
This will reenforce the throwing stick and avoid further cracking
In reply to Post #1
How far does the crack go? If its a small crack at the tip I'd probably cut it back and varnish it.
Any repair kits would add weight at the point you'll feel most
How far does the crack go? If its a small crack at the tip I'd probably cut it back and varnish it.
Any repair kits would add weight at the point you'll feel most
Sorry for delay in replying, I've been blanking with no reception.
It's not as extreme as the video. It's almost as if the resin has come away from the carbon underneath and it is lfting slightly. Hopefully this picture works. Not the best picture but hopefully you'll be able to see what I mean.
It's not as extreme as the video. It's almost as if the resin has come away from the carbon underneath and it is lfting slightly. Hopefully this picture works. Not the best picture but hopefully you'll be able to see what I mean.