Any tips to correct my spools as the line has loaded unevenly.

Line is loaded with a bias towards the bottom of the spool.

Thanks in advance.

In reply to Post #1
Make sure the spools are seated properly, one of mine was uneven when I first spooled up but after removing and refitting the spool it was fine . Never had that happen on any other reels ,or the other pair I have. Failing that you need to remove one of the spool washers

In reply to Post #1
As said need to make sure the washers are correct in numbers and that they are located properly on the spindle.

As with all long come spools they have a tendency to move on the spindle.

The line lay is faultless with these so must be this IMO

In reply to Post #1
As I have understood for many years if you want to optimise the casting performance of a fixed spool reel the line should be loaded with a with a forward taper so there will be more line on the bottom of the spool. This reduces the friction of line on line during the cast.

In reply to Post #1
Terry Edmunds recently did a video of this, have a look for it on youtube.

Daz

In reply to Post #3
Single washer gave result i was after thanks all