Hi guys what size is the thread on the Solar P1 Titanium Indicators that attaches to the hockey stick? Is it possible to get an adaptor made to attach to Jag Snag Ear bracket hockey sticks? I emailed Keith @ Defiant MPS but he needs to know the thread size thanks.

It is a standard size I'm sure some one would know it's like BS2 or something like that

In reply to Post #2
2ba is the standard thread for them, but I wouldn't know if solar have used it here. the jag fitting should be that thread so if he's asking for an adapter I guess solar have used something else

In reply to Post #3
Yes Solar have used a much bigger thread with a weird cross section on it but if I knew the size it might help see the link below from Johnson Ross for a close up picture. Thanks. https://johnsonrosstackle.co.uk/solar-indicators/20152-solar-tackle-p1-titanium-indicator.html

In reply to Post #4
I can't view a large image and it wouldn't help anyway tbh

If you measure the thread it'll narrow it down at least.

Overall width, and thread spacing which is harder to explain

Imperial threads can be a minefield, working out teeth per inch would narrow it down

In reply to Post #1
If you take the hanger / swinger to the local diy shop and in the loose nut and bolt section. Keep trying different ones until you get the right one, and this will let you know what thread it is.....

In reply to Post #7
It's the thread at the other end that's the problem.
Scaling it from a photo it looks around m8 or 3/8(banksticks are 3/8bsf)