CarpForum.co.uk brand mark, a blue stylized fish with a white eye and a smooth modern look, set in the site header against a clean background CarpForum.co.uk wordmark in a bold flowing script style, reading CarpForum.co.uk, displayed in the site header
Menu
Utils
Go Premium Who's Online Members Weather Photo Gallery Articles
Account
Login Register
Bivvi designs (31 posts / 4,834 views)
Zack
Posts: 3,205
Post #31 2 May 2023 00:30
0
In reply to Post #30
>>>Makes sense to me, plastic box, just chuck it all in. Good idea about fitting into the barrow frame that. Lift out slide under the bed or just chuck in the bivvy <<<

I used to actually fit two plastic box's into my barrow frame, the large one near the handles, but at the front above the wheel, I had one that slotted in above the wheel and put bags off bait etc in that one. The tops of the box's with lids lay flush with the frame and bed etc lays perfectly flat on top.

All you have to do is measure the size of the "Hole" in the frame and go to the likes of B&M and see what fits, ideally with a lid. The lip of the plastic box should rest on top of the barrow frame

To make a longer lasting one as I had a habit of breaking them, I fastened two slats of wood on each side of the large box on the longer sides right at the very top to rest on the barrow frame.

I don't think my original thread with pictures etc exist any more, many years ago the forum went iffy and many posts were lost, I lost nearly 4000 posting and reduced to non.
Are you sure?

This action cannot be undone.

Yes, continue

Loading…