Picked up a set for my father - but seem to be an issue with a couple of the shallow spools.
When rotating the drag clicks as expected for about 1/3 of a rotation, but then is silent for the remaining 2/3.
The other shallow and all the LD spools work / sound as expected. Anyone have and ideas what it could be?
Thanks
When rotating the drag clicks as expected for about 1/3 of a rotation, but then is silent for the remaining 2/3.
The other shallow and all the LD spools work / sound as expected. Anyone have and ideas what it could be?
Thanks
In reply to Post #1
There isnt washers stuck to the spool caps is there. Ones that should be remaining in the spool
There isnt washers stuck to the spool caps is there. Ones that should be remaining in the spool
In reply to Post #2
Not that I can see.
It's odd, as there is an audible noise for a part rotation but then either becomes dulled or stops until it gets back to the same point that makes the click.
And it's not an issue with the reel, as when I put the LD spools on all click away as you would expect. So makes me think it's something on these two spools.
Not that I can see.
It's odd, as there is an audible noise for a part rotation but then either becomes dulled or stops until it gets back to the same point that makes the click.
And it's not an issue with the reel, as when I put the LD spools on all click away as you would expect. So makes me think it's something on these two spools.
In reply to Post #3
Ive just received 2 of my reels bought from gooutdoors and they are fine,..still got one to come though
Ive just received 2 of my reels bought from gooutdoors and they are fine,..still got one to come though
In reply to Post #4
Glad yours are all good - I Still can't figure these out.
Glad yours are all good - I Still can't figure these out.
In reply to Post #5
Do you mean when you pull line and drag is engaged? Because the clicker is in the reel so if it was that it be same for all spools. Have you looked underneath the spool to see if there is ridges uniform
Do you mean when you pull line and drag is engaged? Because the clicker is in the reel so if it was that it be same for all spools. Have you looked underneath the spool to see if there is ridges uniform
In reply to Post #6
Ive not seen the emblem 35 but assuming it uses the same spool clicker as the older emblems, then it could still be his spools.
yes the clicker part sits on the spool main shaft but it relies on a machined profile in each spool to make it click, the profile could be damaged or the spools not sitting correctly on the shaft if as he says his other spools are working as normal
Ive not seen the emblem 35 but assuming it uses the same spool clicker as the older emblems, then it could still be his spools.
yes the clicker part sits on the spool main shaft but it relies on a machined profile in each spool to make it click, the profile could be damaged or the spools not sitting correctly on the shaft if as he says his other spools are working as normal
In reply to Post #7
That is the correct clicker assembly, assumed it could be an issue with the machining but nothing that I can work out.
That is the correct clicker assembly, assumed it could be an issue with the machining but nothing that I can work out.
In reply to Post #7
Yea I think all daiwa reels have same. I've never heard of any issues like this though with any daiwa spools. Extreme bad luck, maybe take them back to shop
Yea I think all daiwa reels have same. I've never heard of any issues like this though with any daiwa spools. Extreme bad luck, maybe take them back to shop
In reply to Post #8
If its not the profile on inside of spool then without seeing it i would take all the spool washers out of one of the spools that isnt working and try it again by just pushing the empty spool down onto the clicker, this should ensure that the spool is going far enough down onto the reel shaft and washers not stopping it seating properly
If its not the profile on inside of spool then without seeing it i would take all the spool washers out of one of the spools that isnt working and try it again by just pushing the empty spool down onto the clicker, this should ensure that the spool is going far enough down onto the reel shaft and washers not stopping it seating properly
In reply to Post #10
Thanks woody, just tried that and unfortunately not worked.
Managed to look at it with a headtourch on and can see the clicker going against the grooves machines in the spool but part way round stops making noise, but visually looks no different.
Thanks woody, just tried that and unfortunately not worked.
Managed to look at it with a headtourch on and can see the clicker going against the grooves machines in the spool but part way round stops making noise, but visually looks no different.
In reply to Post #11
i would take them back to shop, i have just received my third one and its also fine, extreme bad luck i would say.
i would take them back to shop, i have just received my third one and its also fine, extreme bad luck i would say.
In reply to Post #12
used these for first time , no fish but nice reels im surprised they are not used more/rated by people who seem to have turned to the 45 version which I don't really like. Nice line clip, shallow spool, superb line lay. nice weight, great thick air bail bail arm and a super 106cm retrieve. Cant go wrong for 108 quid.
one thing I may do is buy the folding handle from the 45 good spool version as its much better when setting up/down and transportation.
used these for first time , no fish but nice reels im surprised they are not used more/rated by people who seem to have turned to the 45 version which I don't really like. Nice line clip, shallow spool, superb line lay. nice weight, great thick air bail bail arm and a super 106cm retrieve. Cant go wrong for 108 quid.
one thing I may do is buy the folding handle from the 45 good spool version as its much better when setting up/down and transportation.
In reply to Post #13
I took your advise, returned them to get replacements and fixed the issue.
Picked up a set for my self whilst I was at it, for the money seem great, much more refined than my infinity br's, tons lighter and smaller as well.
I don't think the handle is that bad, but not as good as a folding.
I took your advise, returned them to get replacements and fixed the issue.
Picked up a set for my self whilst I was at it, for the money seem great, much more refined than my infinity br's, tons lighter and smaller as well.
I don't think the handle is that bad, but not as good as a folding.
In reply to Post #14
32.50 from daiwa when back in stock end if June. The ones that are on the gold spool 45 fit these mate
32.50 from daiwa when back in stock end if June. The ones that are on the gold spool 45 fit these mate
In reply to Post #15
Perfect, I'll pick up 3 when back in stock. Cheers buddy
Perfect, I'll pick up 3 when back in stock. Cheers buddy
In reply to Post #15
So the folding handles from the 45 QT fit the emblem 35 size as well? Thanks
So the folding handles from the 45 QT fit the emblem 35 size as well? Thanks
In reply to Post #17
well i am basing this on the fact the weston developments do a folding handle for these and its suitable for both reels
from website:
2f) Folding handle for Emblem 35/45 SCW 50000C QD
Short 70mm folding handle conversion.
well i am basing this on the fact the weston developments do a folding handle for these and its suitable for both reels
from website:
2f) Folding handle for Emblem 35/45 SCW 50000C QD
Short 70mm folding handle conversion.
In reply to Post #18
Have you a link for the handles from daiwa?
Iv searched everywhere for them .
Only ones in stock is the weston ones at 75 quid a piece
Cheers
Have you a link for the handles from daiwa?
Iv searched everywhere for them .
Only ones in stock is the weston ones at 75 quid a piece
Cheers
In reply to Post #19
no you need to call daiwa spares direct to get them
no you need to call daiwa spares direct to get them
In reply to Post #20
Ok . Do you gave the contact number ?
Ok . Do you gave the contact number ?
In reply to Post #21
my contact has said via email they are not interchangeable but I'm not sure as how would they weston ones be? it would make more sense from a manufacturing point of view that they would be.
number 01698357512.
my contact has said via email they are not interchangeable but I'm not sure as how would they weston ones be? it would make more sense from a manufacturing point of view that they would be.
number 01698357512.
Reading ALL pages