I'm looking at braided mainlines I've been using mono for ever but my fishing has taken me in a completely different direction over the last few years and I'm finding I'm fishing at More extreme distances and in snag and obstacle infested waters so I'm looking at the switch up I need a low diameter strong reliable braid that doesn't cost the earth (asking very little of you guys😂😂
not so bothered on the casting side of its performance as the majority of the fishing will be done by boat I'm also not bothered if it's a carp brand I'm well aware there's as good if not better products available from different sectors of the sport recommendations below thanks.
In reply to Post #1
Spectra braid from ebay, cheap as chips
Spectra braid from ebay, cheap as chips
In reply to Post #1
Spiderwire 8 strand? 19.99 for 300m at a lot of places.
Really good braid even though the diameter ratings are a bit suspect.
0.25mm for 60lb test if I remember right.
Spiderwire 8 strand? 19.99 for 300m at a lot of places.
Really good braid even though the diameter ratings are a bit suspect.
0.25mm for 60lb test if I remember right.
In reply to Post #1
30lb Suffix 832 is the best there is
30lb Suffix 832 is the best there is
In reply to Post #4
Have to agree with above, suffix 832 ticks all the boxes for me
Have to agree with above, suffix 832 ticks all the boxes for me
In reply to Post #1
Depends if you want a sinking braid tbh , if your not bothered then 40lb power pro is superb , or Gardner hydro sink 22lb which is the best braid I've ever used for carping .
I put a link up for Pizza on here a while back for bulk spools of power pro going cheap
Depends if you want a sinking braid tbh , if your not bothered then 40lb power pro is superb , or Gardner hydro sink 22lb which is the best braid I've ever used for carping .
I put a link up for Pizza on here a while back for bulk spools of power pro going cheap
In reply to Post #3
Used this found it was very waxy
Used this found it was very waxy
In reply to Post #7
I'll have a look at tge suggestions thanks
I'll have a look at tge suggestions thanks
In reply to Post #6
How well does hydro sink cast. 90-100 yard max range ?
How well does hydro sink cast. 90-100 yard max range ?
In reply to Post #9
Yeah no problem
Yeah no problem
the 22lb Hydrosink is very good
In reply to Post #4
I use Sufix 832 and have found it excellent too
I use Sufix 832 and have found it excellent too
In reply to Post #11
Seriously glad I went with the 22lb gardner hydro sink now over the 15lb.. cast 35.5 wraps easily.. got the 40lb fox submerge on the 3rd rod that casts just as well.. I was thinking I would only just be getting over 100yrds .. happy customer here
Seriously glad I went with the 22lb gardner hydro sink now over the 15lb.. cast 35.5 wraps easily.. got the 40lb fox submerge on the 3rd rod that casts just as well.. I was thinking I would only just be getting over 100yrds .. happy customer here
In reply to Post #13
Agree, the gardner Hydro sink 22lb is very good
Agree, the gardner Hydro sink 22lb is very good
In reply to Post #4
Yes,👍👍
Yes,👍👍
In reply to Post #1
Powerpro - best braid on the market. I've used it for 20 years and continue to use it. I buy it by diameter, not breaking strain. But be warned, you should not use braid when carp fishing amongst snags! It is not very abrasion resistant and despite the higher breaking strains and lower diameters, it will end in tears. Stick to mono if there's snags or heavy weed or use a suitable leader with the braided mainline.
BTW chaps, there are only a handful of worldwide manufacturers who make braided fibres used to construct fishing lines - quite a few tackle companies are selling you the same lines, but branded differently and with some very colourful claims on its properties I might add.
Powerpro - best braid on the market. I've used it for 20 years and continue to use it. I buy it by diameter, not breaking strain. But be warned, you should not use braid when carp fishing amongst snags! It is not very abrasion resistant and despite the higher breaking strains and lower diameters, it will end in tears. Stick to mono if there's snags or heavy weed or use a suitable leader with the braided mainline.
BTW chaps, there are only a handful of worldwide manufacturers who make braided fibres used to construct fishing lines - quite a few tackle companies are selling you the same lines, but branded differently and with some very colourful claims on its properties I might add.
In reply to Post #16
Sounds just like mono then being rebranded by other manufacturers.
Sounds just like mono then being rebranded by other manufacturers.
In reply to Post #1
in snag and obstacle infested waters braid is completely useless in snags its got zero abrasion resistance it just needs to touch a rock or shell and its gone so you will have to use a strong mono leader
if your boating it out I would go for min 30lb with a min 25lb leader
in snag and obstacle infested waters braid is completely useless in snags its got zero abrasion resistance it just needs to touch a rock or shell and its gone so you will have to use a strong mono leader
I think Gardner are being a bit cheeky though giving us the correct breaking strain for diameter on their hydro sink. I am sure it won't catch on.
Reading ALL pages