|
|
|
|
In reply to Post #47
Just to add to the point raised about fitting isotopes to Korda distance sticks.
Korda advised me to use a baiting needle pushed up through the hole in the bottom of the plastic head to remove the spirit level.
There is no way a baiting needle would have moved it.
I had to resort to a very small Philips screw driver, pushed so hard I felt sure the plastic would break.
But, sure enough, after much pressure, they eventually came out.
Job done.
|
|
|
|
In reply to Post #38
My 48 inch stanley level was a pain in the ass to carry to my swim 😀
Bet your bed isn't level anymore now you've stopped taking it  
|
|
|
|
In reply to Post #18
My wife bought me this for Christmas (last year) I would of never bought one personally but I have got to say it’s brilliant . Makes setting up for self takes really easy
|
|
|
|
|
|
|
In reply to Post #42
There is good reason to use them, I’ve been mapping out a large water that goes down to 53 feet areas that are rocky as hell and so pin point accuracy is the difference between camping and fishing not so divvy imo.
|
|
|
|
These Divvy sticks have become a constant source of amusement on so many levels 
|
|
|
|
In reply to Post #28
I have the long Avid sticks and put some isotope tops on them use them as markers on boards etc most of the time, when I do count wraps I find the curve extremely useful making it easy to load and unload.
|
|
|
|
In reply to Post #30
Got the Pink ones, definitely the best in market when available.
|
|
|
|
In reply to Post #38
 
|
|
|
|
In reply to Post #36
😀 very true Phil. My 48 inch stanley level was a pain in the ass to carry to my swim 😀
|
|
|
|
In reply to Post #35
😀 Surely people can tell by looking at it that it s straight when you push it into the ground.
|
|
|
|
In reply to Post #34
It saves taking one with you Stu. 
|
|
|
|
In reply to Post #34
Why would you want a wonky stick 
|
|
|
|
In reply to Post #32
They have a spirit level on them! Wtf, after hearing that nothing will shock me in carp fishing anymore.
|
|
|
|
In reply to Post #28
I have the Avid sticks and added rubber o rings which do the same job as the grooves on the more expensive sticks saved me having to buy new sticks. I think the idea originally came from O.G. thanks.
|
|
|
|
In reply to Post #4
I received some Korda distance sticks for Christmas and have been puzzling over how to insert isotopes.
I stumbled across your piece on this forum, luckily.
I was surprised how much pressure I had to exert on the underside of the spirit level to get them out, I felt sure they were going to break.
But it worked. Isotopes fitted, happy bunny.
Thank you for your advice.
|
|
|
|
In reply to Post #30
Im liking the red
|
|
|
|
In reply to Post #29
Tbh the elite tackle ones do look superb... What colour do you fancy?
|
|
|
|
In reply to Post #28
I have them,I have never pushed them in by the top.I always use the bar but mine have cracked.Only thing I could put it down to was the sun.Im going get the elite tackle ones
|
|
|
|
In reply to Post #15
I reckon people are thinking about these sticks in the wrong light.
I bought the Avid sticks first of all which were too big and curved so the line spills off them and can get you in a total mess especially at night and or when using flourocarbon.
Then bought the Avid shorter sticks...much better size wise but the same problems still there.
Then bought the Jag/Korda sticks...wow how much better are these, the problem with the line spilling off has now gone away due to the grooves cut into the sticks.
You can see them easily at night due to the isotope acrylic in the tips
If you use them properly...i,e use the supplied T bar and just push the stick into the ground using that and then if you need them deeper in the ground just gently rest the acrylic in the palm of your hand and turn the auger point in with the T bar....imo if you break the acrylic you need to be calming down a couple of notches.
The string with the brass loops and calibrations on it is top notch.
If you were to go out and buy 2 x Jag bank sticks they wouldn't be far short of the price of the distance sticks and these are a specific tool for a specific job.
As you can guess I really rate mine...if you think they are too expensive don't buy them simple as 
|
|
|
|
In reply to Post #26
Hahaha true!!
|
|
|
|
In reply to Post #25
A tenner don't buy you much these days though
|
|
|
|
In reply to Post #19
Hey,Could be worse. I gave up my season ticket for Forest this year to afford better tackle
|
|
|
|
In reply to Post #23
Ahhhh bless ya
|
|
|
|
In reply to Post #19
I'm hurt by that you know how sensitive I am about such things. Shame on you, you bully 
|
|
|
|
In reply to Post #21
|
|
|
|
In reply to Post #19
At least you see other good teams 
|
|
|
|
In reply to Post #16
and mine - big rip off sticks
|
|
|
|
In reply to Post #15
Could be worse could waste money on a season ticket go watch Arsenal
|
|
|
|
|
£65 for a Bankstick you stick your camera on has got to be a the Scam of the year 😂
|
|
|
|
In reply to Post #16
I feel the same way about loads of tackle these days. I can’t understand someone paying the thick end of a grand for a bivvy and wrap. I wonder what people must do for a living to be able to afford a set of custom basias. But I guess people must be buying stuff for the manufacturers to keep making it. I think I’m just getting old. I guess if I was in my 20s, living at home with my parents, loads of disposable income then what’s a few hundred quid on fishing tackle? My sons wouldn’t think anything of spending £60 on a computer game that they complete in a week. So I guess it’s these people that don’t bat an eyelid at £60 on fishing tackle.
|
|
|
|
In reply to Post #15
That's my thoughts too. People who pay that for sticks are daft imo
|
|
|
|
In reply to Post #12
Can't believe that after people have paid a fortune for a couple of Korda sticks they break and you have to pay another fortune for new bits to go on top.
FFS they are only sticks to wrap your line around 
|
|
|
|
In reply to Post #11
Common fault on them
|
|
|
|
In reply to Post #12
Thanks mate appreciate that
|
|
|
|
In reply to Post #11
Elite Tackle do aluminum replacement heads if you cant get the Korda ones.
https://www.elitetackle.co.uk/product/drilled-aluminium-upgraded-heads-for-korda-distance-sticks/
|
|
|
|
In reply to Post #10
I noticed both of my sticks heads had cracked last week. Dose anyone know if Korda sell the heads individually?
|
|
|
|
In reply to Post #9
Keep an eye on the acrylic heads as they crack
|
|
|
|
In reply to Post #4
Thanks so much just sorted it!!!
|
|
|
|
In reply to Post #5
Yes mate the mini isotopes for black and whites as they recommend
|
|
|
|
In reply to Post #4
Ahhhhh, lovely bubbly will try tomorrow. Tried with a wooden cocktail stick but it broke.
Cheers
|
|
|
|
In reply to Post #1
Had the same issue tried every trick and broke a baiting needle or two. I ended up buying elite tackle replacement heads
|
|
|
|
In reply to Post #3
Have you got the correct sized isotopes?
|
|
|
|
In reply to Post #3
Screw the head off, there is a tiny hole just big enough to poke a baiting needle through. That will allow you to push the top off ( bubble level head) drop the isotope in, push the bubble cap back on. Job done 👍
|
|
|
|
In reply to Post #2
Cheers, tried that and the isotope wouldn't fit in and didn't want to force it.
Cheers
|
|
|
|
In reply to Post #1
The hole Fluro end just unscrew s off and you drop the isotope in screw end and then screw back on. Simples.
|
|
|
|
Hi guys,
I am trying to work out how you fit an isotope in a Korda Distance stick. It looks like the level plusg is supposed to come out and you drop it in but can't work out how you get the top plug out?
The only video I can see is Elliott Gray but his pushing the plug back in after his dropped the isotope in.
Driving me nuts lol
Thanks in advance
I have the mini isotopes which fit the black and white bobbings.
|
|
Tackle