In reply to Post #15
The missus bought me a big boy triporter, and the square metal frame thing to support the under barrow bag had a small crack in it...hardly noticeable and did not affect its use in any way, but as she had paid a few quid for the barrow I emailed carp porter with a photo of the part and two days later a replacement was delivered.
I thought this was pretty good customer service, To be fair though they never replied or even acknowledged my emai, but it was sorted quickly, so no complaints from me
The missus bought me a big boy triporter, and the square metal frame thing to support the under barrow bag had a small crack in it...hardly noticeable and did not affect its use in any way, but as she had paid a few quid for the barrow I emailed carp porter with a photo of the part and two days later a replacement was delivered.
I thought this was pretty good customer service, To be fair though they never replied or even acknowledged my emai, but it was sorted quickly, so no complaints from me
Just been told Korda won't be doing power porters,they may do them direct to the public in the future but as for now it's a no go.This seems very odd and will cost them customers surely
In reply to Post #17
I reckon the arse Is is falling out of factory power porters, prestige or Nash. Who in their right mind would pay £1000 for a power barrow when they can convert their perfectly good barrow for £400.
I reckon the arse Is is falling out of factory power porters, prestige or Nash. Who in their right mind would pay £1000 for a power barrow when they can convert their perfectly good barrow for £400.
In reply to Post #18
You might be right
You might be right
In reply to Post #18
The arse is dropping out of the fishing tackle market full stop. £1000 for a bloody barrow.
The arse is dropping out of the fishing tackle market full stop. £1000 for a bloody barrow.
In reply to Post #18
agreed
I bought the Global Angling plug and play kit my FOX EXPLORER DELUXE its now a brilliant 3 wheeled 24v electric barrow that performs as good as any £1000 ready made barrow some say its even better ?
took between 15 and 25 mins to fit
Supplied in kit form with everything required to transform your barrow with no drilling or modifications to the original barrow. All parts are designed to clip, bolt, or strap into place.
Modern hub motor fitted inside the centre of the wheel removes the need for bulky, unbalanced attachments to the frame or forks.
Using state-of-the-art, lightweight Lithium-Polymer batteries, you get the benefit of reliable power, without the added weight.
Microprocessor controlled for variable speed & torque, with thumb throttle and waterproof LCD display.
agreed
I bought the Global Angling plug and play kit my FOX EXPLORER DELUXE its now a brilliant 3 wheeled 24v electric barrow that performs as good as any £1000 ready made barrow some say its even better ?
took between 15 and 25 mins to fit
Supplied in kit form with everything required to transform your barrow with no drilling or modifications to the original barrow. All parts are designed to clip, bolt, or strap into place.
Modern hub motor fitted inside the centre of the wheel removes the need for bulky, unbalanced attachments to the frame or forks.
Using state-of-the-art, lightweight Lithium-Polymer batteries, you get the benefit of reliable power, without the added weight.
Microprocessor controlled for variable speed & torque, with thumb throttle and waterproof LCD display.
In reply to Post #21
Due to back and breathing problems I recently bit the bullet and bought a secondhand Power Porter. As far as I can tell the tube thickness Of my old MK1 (the one with the grey Hammerite style finish) is 50% greater than the Power Porter, 1.5mm wall compared to 1mm wall. Consequently, due to this, and cackhandednes of the previous owner(s), pretty much all the clamping points were stuffed. I've had to spend a fair bit of time fitting 2mm wall box section inserts to give a fim base to clamp to.
Due to back and breathing problems I recently bit the bullet and bought a secondhand Power Porter. As far as I can tell the tube thickness Of my old MK1 (the one with the grey Hammerite style finish) is 50% greater than the Power Porter, 1.5mm wall compared to 1mm wall. Consequently, due to this, and cackhandednes of the previous owner(s), pretty much all the clamping points were stuffed. I've had to spend a fair bit of time fitting 2mm wall box section inserts to give a fim base to clamp to.
In reply to Post #20
I must admit it's a lot of dough a grand for a barrow, but look at anything else that's half decent these days, bivvys take the biscuit. I paid £750 for my mk6. Added a bit to it, but nearly 6 years later its saved my back more than a few times and as some of you know, because of it, I take the kitchen sink for a three night session.
First bit of kit I'd buy again to be honest if I woke up one morning and it had dissapeared.
I must admit it's a lot of dough a grand for a barrow, but look at anything else that's half decent these days, bivvys take the biscuit. I paid £750 for my mk6. Added a bit to it, but nearly 6 years later its saved my back more than a few times and as some of you know, because of it, I take the kitchen sink for a three night session.
First bit of kit I'd buy again to be honest if I woke up one morning and it had dissapeared.
In reply to Post #23
Apparently Korda are doing the power porters,I have emailed them directly.Im just not sure if you have to order direct from them,im awaiting a reply to this.
Edit:Direct from Korda only
Apparently Korda are doing the power porters,I have emailed them directly.Im just not sure if you have to order direct from them,im awaiting a reply to this.
Edit:Direct from Korda only
In reply to Post #24
Any idea when you can start buying on carp porter website? (notice it's a new website now)
Any idea when you can start buying on carp porter website? (notice it's a new website now)
In reply to Post #18
Converted my mk2 fat boy for £200 all in , took me best part of 2 hours too , not a cat in hells chance am I paying best part of a grand for a barrow 👍
Converted my mk2 fat boy for £200 all in , took me best part of 2 hours too , not a cat in hells chance am I paying best part of a grand for a barrow 👍
In reply to Post #25
I dont,sorry
I dont,sorry
In reply to Post #26
Those kits with a standard battery are £410+..... A bit more than £200...
Those kits with a standard battery are £410+..... A bit more than £200...
In reply to Post #28
I mailed someone at Korda about a mk8 pp from what I gather there setting up an assembly side for the motor side of it,frames made in the east as they previously were but he couldn't tell me when they ll be available again.I've looked for the e mail just to make sure my facts are correct but I must of deleted it.
I've gone with bcuk I can't comment on the product as I only ordered it tonight but the customer service is excellent. I'm having a frame Brace powder coating and a power kit on a mk2 so if I can add anything constructive when it's done I'll post something.
I mailed someone at Korda about a mk8 pp from what I gather there setting up an assembly side for the motor side of it,frames made in the east as they previously were but he couldn't tell me when they ll be available again.I've looked for the e mail just to make sure my facts are correct but I must of deleted it.
I've gone with bcuk I can't comment on the product as I only ordered it tonight but the customer service is excellent. I'm having a frame Brace powder coating and a power kit on a mk2 so if I can add anything constructive when it's done I'll post something.
In reply to Post #28
ANDY
Those kits with a standard battery are £410+..... A bit more than £200...
where does he say he used a kit
there are lots of ways Ali express do motorised wheels and all the bits needed if you handy with your hands and have electrical knowledge for under £200
ANDY
Those kits with a standard battery are £410+..... A bit more than £200...where does he say he used a kit
there are lots of ways Ali express do motorised wheels and all the bits needed if you handy with your hands and have electrical knowledge for under £200