When I wind in a rod where I've blobbed the floss the hookbait has either come off or the bait has slipped off the swivel and is lucky to be still attached. What am I doing wrong. I normally cut off the floss for about a 1 CM then burn it till it touches the bait then use the lighter to flatten it.
I like the speed of it but darent use it due to the risk of having rods out with no hookbaits
I like the speed of it but darent use it due to the risk of having rods out with no hookbaits
In reply to Post #1
It might be your baits are very soft. Use extremely hard hookbaits.
If you do use, or need to use softer hookbaits, try meshing them in tights or stocking mesh, and where you have created the twist save the tag ends and tie them to your rig ring.
It might be your baits are very soft. Use extremely hard hookbaits.
If you do use, or need to use softer hookbaits, try meshing them in tights or stocking mesh, and where you have created the twist save the tag ends and tie them to your rig ring.
In reply to Post #1
are your baits swelling causing this??
are your baits swelling causing this??
In reply to Post #1
Why not tie a loop and use a hair stop?
Why not tie a loop and use a hair stop?
In reply to Post #1
Must say I do this to all my hookbaits and never had any issue. I do use proper hookbaits though, as opposed to say out of the bag boilies. A couple of things you could possibly try:
Use thicker or expanding dental floss, I used to use really thick dental floss from Lidl but they don't do it anymore, it's Dentalux in an orange dispenser. It is on ebay, but it's a bit rich for my liking.
Alternatively, double or triple over some thin floss. It's what I do now.
Or you could try some bait floss caps.
Whatever you choose to do, make sure you swivel is pulled well into the bait
Hope this helps.
Must say I do this to all my hookbaits and never had any issue. I do use proper hookbaits though, as opposed to say out of the bag boilies. A couple of things you could possibly try:
Use thicker or expanding dental floss, I used to use really thick dental floss from Lidl but they don't do it anymore, it's Dentalux in an orange dispenser. It is on ebay, but it's a bit rich for my liking.
Alternatively, double or triple over some thin floss. It's what I do now.
Or you could try some bait floss caps.
Whatever you choose to do, make sure you swivel is pulled well into the bait
Hope this helps.
In reply to Post #1
Maybe your melting it too much, stop the flame sooner and blob a bit more
Maybe your melting it too much, stop the flame sooner and blob a bit more
In reply to Post #1
just put a little plastic topper on..corn or pretend maggot etc, then blob it, that won't come off and it good to have a little topper anyway..🙂
just put a little plastic topper on..corn or pretend maggot etc, then blob it, that won't come off and it good to have a little topper anyway..🙂
If you're using straight from the bag boilies as hookbaits they will be getting too soft potentially. Small fish will whittle them off. Is there crayfish present?
In reply to Post #1
They could be coming off on the retrieve
They could be coming off on the retrieve
In reply to Post #9
Exactly this Braders. I fish soft baits when I drop from a boat. No chance it's coming in intact being dragged through 250 yards of weed, but you can see it's fishing if you go out and check with a scope
Exactly this Braders. I fish soft baits when I drop from a boat. No chance it's coming in intact being dragged through 250 yards of weed, but you can see it's fishing if you go out and check with a scope
In reply to Post #1
On spinners I just tie a stop on.
On spinners I just tie a stop on.
In reply to Post #1
What baiting needle are you using? I was using a standard needle but found I had similar issues as the bore it created was meaning the floss would slip... moved over to a fine needle (Fox micro fine needle) and the issue was resolved.
What baiting needle are you using? I was using a standard needle but found I had similar issues as the bore it created was meaning the floss would slip... moved over to a fine needle (Fox micro fine needle) and the issue was resolved.
In reply to Post #12
I use a fine gate needle (purple one from Korda) and the baits are wafters and pop ups.
I use a fine gate needle (purple one from Korda) and the baits are wafters and pop ups.
In reply to Post #8
I don't use baits straight out of the bag as I mainly use wafters. No there is no crayfish present
I don't use baits straight out of the bag as I mainly use wafters. No there is no crayfish present
In reply to Post #14
So why not use a normal hair?
So why not use a normal hair?