I know it's the wrong time of the year to be talking about floater fishing, but with a bit more time on my hands I have been sorting through my floater rigs already looking ahead to next year.
Had mixed results during the summer using cork balls, hookable floaters, cut down pop ups etc.
The bit I really struggle with is getting the hookbait to sit tight to the shank of the hook with a hair and boilie stop set up. Also annoys me how it leans over to the side of the hook and wont stay in place on the back of the hook as you would want it to.
Any tips or advice anyone?
Had mixed results during the summer using cork balls, hookable floaters, cut down pop ups etc.
The bit I really struggle with is getting the hookbait to sit tight to the shank of the hook with a hair and boilie stop set up. Also annoys me how it leans over to the side of the hook and wont stay in place on the back of the hook as you would want it to.
Any tips or advice anyone?
In reply to Post #1
There's many different options but I super glue the hook bait to the shank of the hook.
I like a trimmed down brown pop up, you can scrape a little channel and glue the hook into it.
There's many different options but I super glue the hook bait to the shank of the hook.
I like a trimmed down brown pop up, you can scrape a little channel and glue the hook into it.
In reply to Post #1
i always as a rule, tie the hair and thread my bait on before whipping the hook on. this way you always get your bait as close as possible to the shank. i normally like to use a really small clear heat shrink kicker just to help the hooking angle a bit.
i always as a rule, tie the hair and thread my bait on before whipping the hook on. this way you always get your bait as close as possible to the shank. i normally like to use a really small clear heat shrink kicker just to help the hooking angle a bit.
In reply to Post #2
That's what I do and works really well
That's what I do and works really well
In reply to Post #1
Cut a v into the bait and superglue it.
Cut a v into the bait and superglue it.
In reply to Post #5
Old Skool
Old Skool
I use the enterprise tackle imitation dog biscuits. They have a counterbalance weight that
keeps your hook out of the water on the opposite side.
They are also good as you can freeline them up to 20 yards or so with the right balanced tackle.
keeps your hook out of the water on the opposite side.
They are also good as you can freeline them up to 20 yards or so with the right balanced tackle.
In reply to Post #7
They are good, but artificial baits are banned by my club.
They are good, but artificial baits are banned by my club.
In reply to Post #1
A small cube of wine cork, mounted d rig fashion, sits perfectly
Hook sits under the bait but has a bit of movement, you can take the 'bait' off to trim or change, have several baits with the upper edge painted to be more visable. A dab of fish oil or hydro keeps the cork really attractive.
A small cube of wine cork, mounted d rig fashion, sits perfectly
Hook sits under the bait but has a bit of movement, you can take the 'bait' off to trim or change, have several baits with the upper edge painted to be more visable. A dab of fish oil or hydro keeps the cork really attractive.
In reply to Post #9
Kind of reversed D rig. Now thats different. I will be giving that one a try
Kind of reversed D rig. Now thats different. I will be giving that one a try
In reply to Post #10
Just make sure you trim the cork as much as possible, cork is far more bouyant than a mixer or floating pellet so fish can spook when taking because of this. Unless they are really hammering down the floaters you will likely get a lot of aborted takes
Just make sure you trim the cork as much as possible, cork is far more bouyant than a mixer or floating pellet so fish can spook when taking because of this. Unless they are really hammering down the floaters you will likely get a lot of aborted takes
In reply to Post #11
Invariably I use sanded down cork balls, glugged in a 1/5 ratio of hydrolysate and salmon oil, made fresh each year in the spring, I've found using it with a short fairly thick gauge wire hook as well as the impregnation of the cork with liquid ( obvious using a mini vacuum chamber ) it tends to sit quite low. I do use a size 6 for most floater fishing though
Invariably I use sanded down cork balls, glugged in a 1/5 ratio of hydrolysate and salmon oil, made fresh each year in the spring, I've found using it with a short fairly thick gauge wire hook as well as the impregnation of the cork with liquid ( obvious using a mini vacuum chamber ) it tends to sit quite low. I do use a size 6 for most floater fishing though
In reply to Post #12
Sounds nice, but a lot more faffing about than just using a popup or floating pellet
Sounds nice, but a lot more faffing about than just using a popup or floating pellet
In reply to Post #13
slab of white crust.
flick it at a fish.
zzzztztztzzztzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
slab of white crust.
flick it at a fish.
zzzztztztzzztzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
In reply to Post #14
I've found crust can be a great bait, but also it can be like a massive warning flag to the fish on some waters
I've found crust can be a great bait, but also it can be like a massive warning flag to the fish on some waters